Search Results for “employee orientation”

2,932 results · showing 2881–2900 · partial match · includes related terms · 308 ms

Search Results

1. PDF

   AS4-Unitape-2

   …layup angles 0º, 45º, -45º, and 90º refer to the orientation of the Warp/longitudinal fiber direction. The laminate stacking sequences in this program are not specific to any design. Therefore, careful consideration should be given to the validity of properties derived from this program based on the design specific laminates in a structure to be…

   https://www.wichita.edu/industry_and_defense/NIAR/Research/hexcel-8552/AS4-Unitape-2.pdf

2. PDF

   T40-800-Unitape-2

   …laminates in a structure to be certified. Table 1-2 also emphasizes those properties and test condition combinations believed to constitute the worst case, which in general is cold dry for tension and hot wet for compression and other matrix dominated properties. Page 16 of 258 July 27, 2012 (%0º/%±45º/%90º) Actual Test Type (25/50/25 - QI) UNT1…

   https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5215/T40-800-Unitape-2.pdf

3. PDF

   Parcell_cv_2021

   …course emphasizes the importance of effective face-to-face communication in building meaningful relationships, grooming civic leadership, and producing marketable employees. Human communication skills taught include: how to give effective presentations, facilitate small group discussions, handle conflict, manage diverse constituencies, and cultivate…

   https://www.wichita.edu/profiles/_cvs/Parcell_cv_2021.pdf

4. PDF

   Feldman_Federal_Financial_Aid_Policy

   …Policy and College Behavior 

   https://www.wichita.edu/about/wsunews/archive/images/Feldman_Federal_Financial_Aid_Policy.pdf

5. PDF

   Hale-LaDonna-CV.pdf

   … for pharmacists, Kansas Pharmacists Association / Kansas Employee Pharmacists Council, Long Term Care and Community Pharmacists Workshop. Topeka, KS. Feb 2001. 24. Medication review: a look at drug interactions. CE for nurses and certified dietary managers, Rural Eastern Kansas Area Health Education Center. Pittsburg, KS. Nov 2000. 25. Treatment of insomnia…

   https://www.wichita.edu/profiles/_cvs/Hale-LaDonna-CV.pdf.pdf

6. PDF

   TuitionProposalCombinedFY22

   …will allow us to maintain purchasing power for lab consumables and equipment, and to keep up with employee benefit increases and promotions. The increase is estimated to generate approximately $225,000 in FY 2022. This proposal was presented to and discussed with our students at two well publicized virtual town hall meetings (October 5, 2020 and October …

   https://www.wichita.edu/administration/budget/TuitionProposalCombinedFY22.pdf

7. PDF

   Toray-TC1225-LM-PAEK-T700GC-UNI-Qualification-CAM-RP-2025-016-RevA-2.24.2026-MPDR-Final

   …is cold ambient for tension and hot wet for compression and other matrix dominated properties. For the single shear bearing test, the ASTM D5961-17 stabilized single shear single fastener bearing test setup (Procedure C) shall be used. Page 19 of 396 February 24, 2026 CAM-RP-2025-016 Rev A (%0º/%±45º/%90º) Actual Test Type (25/50/25 - QI) UNT1…

   https://www.wichita.edu/industry_and_defense/NIAR/Documents/Toray-TC1225-LM-PAEK-T700GC-UNI-Qualification-CAM-RP-2025-016-RevA-2.24.2026-MPDR-Final.pdf

8. PDF

   NCAMPPrepregPCDPreparationandMaintenanceGuideRevB

   …and corresponding shelf-life. Specify shelf-life revalidation procedures, if applicable. 4.2 Manufacturing Process and Control a. Employee training and qualification requirements shall be described in the PCD or a related document. It is advisable that employees be briefed through a meeting by the engineer or manager in charge prior to the…

   https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NCAMPPrepregPCDPreparationandMaintenanceGuideRevB.pdf

9. PDF

   NCAMPNRP102CarbonFiberPCDPreparationandMaintenanceGuideMarch2...

   …condition, shelf-life, and marking requirements. Specify shelf-life revalidation procedures, if applicable. 4.2 Manufacturing Process and Control a. Employee training and qualification requirements shall be described in the PCD or related document. It is advisable that employees be briefed through a meeting by an engineer or manager in charge prior to…

   https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NCAMPNRP102CarbonFiberPCDPreparationandMaintenanceGuideMarch2....pdf

10. PDF

    20190618UPUSSSenateMeetingMinutes

    … in April as an Open Forum for combining the Senates. Senates will continue being separate but will meet jointly. USS numbers will continue to decline as new employees are hired in as UP employees. • USS and UP going forward will meet jointly. If we need to meet separately on different issues those meetings will be scheduled as needed. • Comp time vs.…

    https://www.wichita.edu/_archive/services/staffsenate/_documents/20190618UPUSSSenateMeetingMinutes.pdf

11. PDF

    Renegade-8HS-Quartz-fabric-CAM-RP-2024-007-Rev-A-10.8.25-MPDR

    …specific laminates in a structure to be certified. In the case of the fabric materials, certain laminates, such as the quasi-isotropic layup, have an unequal number of +45° and -45° plies. While such lay-ups are mid-plane symmetric, there exists the possibility of differences in warp and fill modulus values leading to a slight deviation from perfect…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Renegade-8HS-Quartz-fabric-CAM-RP-2024-007-Rev-A-10.8.25-MPDR.pdf

12. PDF

    Toray-3960-Uni-CAM-RP-2024-004-Rev-A-9.4.25-MPDR-DRAFT

    …wet for compression and other matrix dominated properties. Page 21 of 556 September 4, 2025 (%0º/%±45º/%90º) Actual Test Type (25/50/25 - QI) UNT1 (10/80/10) UNT2 (50/40/10) UNT3 (25/50/25 - QI) UNC1 (10/80/10) UNC2 (50/40/10) UNC3 (25/50/25 - QI) SBS1 (25/50/25 - QI) OHT1 (10/80/10) OHT2 (50/40/10) OHT3 (25/50/25 - QI) FHT1 (10/80/10) FHT2 (50/40/10)…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Toray-3960-Uni-CAM-RP-2024-004-Rev-A-9.4.25-MPDR-DRAFT.pdf

13. PDF

    CAM-RP-2021-025_Rev_NC_Victrex_LMPAEK_AS4_12k_Uni_MPDR_01-13-26

    …laminates in a structure to be certified. In the case of the fabric materials, certain laminates, such as the quasi isotropic layup, have an unequal number of +45° and -45° plies. While such lay-ups are mid-plane symmetric, there exists the possibility of differences in warp and fill modulus values leading to a slight deviation from perfect balanced – i.e.…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/CAM-RP-2021-025_Rev_NC_Victrex_LMPAEK_AS4_12k_Uni_MPDR_01-13-26.pdf

14. PDF

    Toray-3960-T1100G-Uni-Qualification-CAM-RP-2023-002-RevB-MPDR-1.2.2026

    …those properties and test condition combinations believed to constitute the worst case, which in general is cold dry for tension and hot wet for compression and other matrix dominated properties. For the single shear bearing test, the ASTM D5961-17 stabilized single shear single fastener bearing test setup (Procedure C) shall be used. Page 24 of 377…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Toray-3960-T1100G-Uni-Qualification-CAM-RP-2023-002-RevB-MPDR-1.2.2026.pdf

15. PDF

    Toray-TC380-T800HB-6K-2x2-Twill-CAM-RP-2025-023-Rev-9-29-2025-MPDR

    …1-3 also emphasizes those properties and test condition combinations believed to constitute the worst case, which in general is cold dry for tension and hot wet for compression and other matrix dominated properties. Page 19 of 395 September 29, 2025 (%0º/%±45º/%90º) Test Type Code (25/50/25 - QI) UNT1 (10/80/10 - SF) UNT2 (40/20/40 - HD) UNT3 (25/50/25 …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Toray-TC380-T800HB-6K-2x2-Twill-CAM-RP-2025-023-Rev-9-29-2025-MPDR.pdf

16. PDF

    Spirit-CAM-RP-2019-057_Hexcel-8552S-8HS-Fabric_Rev-7-16-25

    …any design. Therefore, careful consideration should be given to the validity of properties derived from this program based on the design specific laminates in a structure to be certified. In the case of the fabric materials, certain laminates, such as the quasi isotropic layup, have an unequal number of +45° and -45° plies. While such lay-ups are mid-plane…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/Spirit-CAM-RP-2019-057_Hexcel-8552S-8HS-Fabric_Rev-7-16-25.pdf

17. PDF

    08-14-2018

    …Total Rewards and Sheryl Propst, Assistant Director H.R. I. Call to Order 9:00am II. Guest Speaker: Jamie Olmstead a. Open Enrollment Information:  KDHE is requiring all employees to take an active role in their benefits to make sure that they are still getting the coverage they need.  Each enrollment period for benefits will be an “active…

    https://www.wichita.edu/_archive/services/staffsenate/_documents/08-14-2018.pdf

18. PDF

    1._19.2011

    …is in Topeka discussing the budget and how the governor’s budget will affect higher education. Anticipating 1.4- 1.6 million deficit to the budget for WSU. b. Classified employee market adjustment will be discussed and how to handle in the coming year(s). c. Some questions were discussed regarding the statement in the governor’s speech regarding a freeze…

    https://www.wichita.edu/_archive/services/staffsenate/_documents/1._19.2011.pdf

19. PDF

    Toray-TC380-T1100GC-24K-Uni-CAM-RP-2025-021-Rev-9-24-2025-MPDR

    …matrix dominated properties. Page 20 of 510 September 24, 2025 CAM-RP-2025-021 Rev – Number of Batches x Number of Panels x Number of Test Specimens (%0º/%±45º/%90º) Test Type Code (25/50/25 - QI) UNT1 (10/80/10 - SF) UNT2 (50/40/10 - HD) UNT3 (25/50/25 - QI) UNC1 (10/80/10 -SF) UNC2 (50/40/10 - HD) UNC3 (25/50/25 - QI) OHT1 (10/80/10 - SF) OHT2…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Toray-TC380-T1100GC-24K-Uni-CAM-RP-2025-021-Rev-9-24-2025-MPDR.pdf

20. PDF

    Victrex-LMPAEK-AS7-UDT-CAM-RP-2025-009-Rev-9.15.25

    …those properties and test condition combinations believed to constitute the worst case, which in general is cold dry/ambient for tension and hot wet for compression and other matrix dominated properties. Page 18 of 309 September 15, 2025 (%0º/%±45º/%90º) Actual Test Type (25/50/25 - QI) UNT1 (10/80/10) UNT2 (50/40/10) UNT3 (25/50/25 - QI) UNC1…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/Victrex-LMPAEK-AS7-UDT-CAM-RP-2025-009-Rev-9.15.25.pdf