424 results · showing 401–420 · partial match · 171 ms

Search Results

  1. PDF

    TenCate-BT250E-6-S2-Unitape-284-gsm-33-RC-Qualification-Material-Property-Data-Report

    …kept in the environmental chamber for up to an additional 60 days. Alternatively, the specimens may have been removed from the environmental chamber and placed in a sealed plastic bag along with a moist cotton towel for a maximum of 14 days until mechanical testing. Strain-gaged specimens were removed from the controlled environment for a maximum of 2 hours …

    https://www.wichita.edu/industry_and_defense/NIAR/Research/tencate-bt250e-6/TenCate-BT250E-6-S2-Unitape-284-gsm-33-RC-Qualification-Material-Property-Data-Report.pdf

  2. PDF

    WSU_Housing_Report_12_1_15

    …pans, cutlery, ect. I love to cook but I really don't have the money or space to purchase and store all the things required to cook 1 0.18% I wish we were allowed to bring bean bag chairs or small chairs into the rooms in Shocker hall 1 0.18% I would absolutely love to live on campus again. However, I can't justify the cost when I could live…

    https://www.wichita.edu/services/strategic_communications/wsunews/documents/WSU_Housing_Report_12_1_15.pdf

  3. PDF

    CAM-RP-2015-038-Rev-NC-TenCate-BT250E-6-IM7-GP-Unitape-MPDR-10.25.2017

    …kept in the environmental chamber for up to an additional 60 days. Alternatively, the specimens may have been removed from the environmental chamber and placed in a sealed plastic bag along with a moist cotton towel for a maximum of 14 days until mechanical testing. Strain-gaged specimens were removed from the controlled environment for a maximum of 2 hours …

    https://www.wichita.edu/industry_and_defense/NIAR/Research/tencate-bt250e-6/CAM-RP-2015-038-Rev-NC-TenCate-BT250E-6-IM7-GP-Unitape-MPDR-10.25.2017.pdf

  4. PDF

    T650-3k-PW-2

    …conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM 21297-04003 bolts with NASM 21084 nuts and MS21206 washers for FHT and FHC 2) NASM 21297-04013 bolts with MS 21084 nuts and MS21206 washers for SSB Page 13 of 237 July 27, 2012…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5215/T650-3k-PW-2.pdf

  5. PDF

    T650-6k-5HS-2

    …conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM 21297-04003 bolts with NASM 21084 nuts and MS21206 washers for FHT and FHC 2) NASM 21297-04013 bolts with MS 21084 nuts and MS21206 washers for SSB Page 13 of 247 July 27, 2012…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5215/T650-6k-5HS-2.pdf

  6. PDF

    AS4-PW-2

    …conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM 21297-04003 bolts with MS 21084 nuts and MS21206 washers for FHT and FHC 2) NASM 21297-04013 bolts with MS 21084 nuts and MS21206 washers for SSB Page 17 of 268 CAM-RP-2010-006 April …

    https://www.wichita.edu/industry_and_defense/NIAR/Research/hexcel-8552/AS4-PW-2.pdf

  7. PDF

    T40-800-Unitape-2

    …conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM 21297-04003 bolts with MS 21084 nuts and MS 21206 washers for FHT and FHC 2) NASM 21297-04013 bolts with MS 21084 nuts and MS 21206 washers for SSB Page 14 of 258 July 27, 2012…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5215/T40-800-Unitape-2.pdf

  8. PDF

    Toray-TC1225-LM-PAEK-T700GC-UNI-Qualification-CAM-RP-2025-016-RevA-2.24.2026-MPDR-Final

    … days. Alternatively, the specimens may Page 23 of 396 February 24, 2026 CAM-RP-2025-016 Rev A have been removed from the environmental chamber and placed in a sealed plastic bag along with a moist cotton towel for a maximum of 14 days until mechanical testing. Straingaged specimens were removed from the controlled environment for a maximum of 2 hours…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Toray-TC1225-LM-PAEK-T700GC-UNI-Qualification-CAM-RP-2025-016-RevA-2.24.2026-MPDR-Final.pdf

  9. PDF

    Toray-3960-T1100G-Uni-Qualification-CAM-RP-2023-002-RevB-MPDR-1.2.2026

    …kept in the environmental chamber for up to an additional 60 days. Alternatively, the specimens may have been removed from the environmental chamber and placed in a sealed plastic bag along with a moist cotton towel for a maximum of 14 days until mechanical testing. Strain-gaged specimens were removed from the controlled environment for a maximum of 2 hours …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Toray-3960-T1100G-Uni-Qualification-CAM-RP-2023-002-RevB-MPDR-1.2.2026.pdf

  10. PDF

    Victrex-LMPAEK-AS7-UDT-CAM-RP-2025-009-Rev-9.15.25

    …conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM 21297-04004 bolts with NASM 21084 nuts and MS21206 washers for FHT and FHC 2) NASM 21297-04016 bolts with MS 21084 nuts and MS21206 washers for SSB 1.5.2.3Specimen Strain Device Used…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/Victrex-LMPAEK-AS7-UDT-CAM-RP-2025-009-Rev-9.15.25.pdf

  11. PDF

    Toray-TC380-T1100GC-24K-Uni-CAM-RP-2025-021-Rev-9-24-2025-MPDR

    …kept in the environmental chamber for up to an additional 60 days. Alternatively, the specimens may have been removed from the environmental chamber and placed in a sealed plastic bag along with a moist cotton towel for a maximum of 14 days until mechanical testing. Strain-gaged specimens were removed from the controlled environment for a maximum of 2 hours …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Toray-TC380-T1100GC-24K-Uni-CAM-RP-2025-021-Rev-9-24-2025-MPDR.pdf

  12. PDF

    Tenax-E-TPCL-PEEK-HTA40-E13-3K-5HS-CAM-RP-2019-007-MPDR03-08--Final

    …conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM 21297-04003 bolts with NASM 21084 nuts and MS21206 washers for FHT and FHC 2) NASM 21297-04013 bolts with MS 21084 nuts and MS21206 washers for SSB 1.5.2.3 Specimen Strain Device Used…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Tenax-E-TPCL-PEEK-HTA40-E13-3K-5HS-CAM-RP-2019-007-MPDR03-08--Final.pdf

  13. PDF

    EP2190-IMS65-UNI-CAM-RP-2022-001-Rev-9.18.2025-MPDR

    …kept in the environmental chamber for up to an additional 60 days. Alternatively, the specimens may have been removed from the environmental chamber and placed in a sealed plastic bag along with a moist cotton towel for a maximum of 14 days until mechanical testing. Strain-gaged specimens were removed from the controlled environment for a maximum of 2 hours …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/EP2190-IMS65-UNI-CAM-RP-2022-001-Rev-9.18.2025-MPDR.pdf

  14. PDF

    Qual-CAM-RP-2009-015-Rev-B-Hexcel-8552-IM7-MPDR-04.16.19

    …conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM 21297-04003 bolts with MS 21084 nuts and MS21206 washers for FHT and FHC 2) NASM 21297-04013 bolts with MS 21084 nuts and MS21206 washers for SSB Page 16 of 223 April 16, 2019…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Qual-CAM-RP-2009-015-Rev-B-Hexcel-8552-IM7-MPDR-04.16.19.pdf

  15. PDF

    TC1225_5HS_Qualification_CAM-RP-2024-023_RevNC_MPDR_8-1-2025_Final

    …kept in the environmental chamber for up to an additional 60 days. Alternatively, the specimens may have been removed from the environmental chamber and placed in a sealed plastic bag along with a moist cotton towel for a maximum of 14 days until mechanical testing. Straingaged specimens were removed from the controlled environment for a maximum of 2 hours…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/TC1225_5HS_Qualification_CAM-RP-2024-023_RevNC_MPDR_8-1-2025_Final.pdf

  16. PDF

    T650-3k-70-PW-2

    …conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM 21297-04003 bolts with NASM 21084 nuts and MS21206 washers for FHT and FHC 2) NASM 21297-04013 bolts with MS 21084 nuts and MS21206 washers for SSB Page 13 of 237 July 27, 2012…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5250-5/T650-3k-70-PW-2.pdf

  17. PDF

    12k-HTS40-2

    …conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM14181-04004 bolts with MS14182 nuts and MS14183 washers for FHT and FHC 2) NASM 21297-04013 bolts with MS 21084 nuts and MS21206 washers for SSB 3) NASM 21296 bolts with MS21085 nuts and…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/tencate-tc250/12k-HTS40-2.pdf

  18. PDF

    T650-6k-5HS-2

    …conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM 21297-04003 bolts with NASM 21084 nuts and MS21206 washers for FHT and FHC 2) NASM 21297-04013 bolts with MS 21084 nuts and MS21206 washers for SSB Page 13 of 247 July 27, 2012…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5250-5/T650-6k-5HS-2.pdf

  19. PDF

    T650-Unitape-2

    …conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM 21297-04003 bolts with MS 21084 nuts and MS 21206 washers for FHT and FHC 2) NASM 21297-04013 bolts with MS 21084 nuts and MS 21206 washers for SSB Page 13 of 265 October 10, 2017…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5250-5/T650-Unitape-2.pdf

  20. PDF

    T650-3k-70-PW-2

    …conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM 21297-04003 bolts with MS 21084 nuts and MS 21206 washers for FHT and FHC. 2) NASM 14181-04016 bolts with MS 14182 nuts and MS 14183 washers for SSB. 1.5.2.3 Specimen Strain Device Used…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-ep2202/T650-3k-70-PW-2.pdf