Search Results for “design”

8,539 results · showing 5501–5520 · 459 ms

Search Results

1. PDF

   NMS-451-slash-14-Rev-B-November-18-2024-Cytec-MTM45-1-HTS-Unitape

   … • Standard width was revised to 24”, 50” was a typo. Tulsa, OK produced the material to 12” wide. QUALIFIED PRODUCTS LIST: • Supplier Product Designation name was revised from “Formerly MTM45-1/HTS(12K)-145-32%RW” to “MTM45-1-32%-12KHTS40-145-610 (Formerly MTM45-1/HTS(12K)-145-32%RW)”. • Supplier Name additional information was added, “Cytec Engineered…

   https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-451-slash-14-Rev-B-November-18-2024-Cytec-MTM45-1-HTS-Unitape.pdf

2. PDF

   NMS-085-Rev-C-Base-Material-Spec-1-15-2020

   …TABLE 4. The report will include the following information: 1) Manufacturer name and product designation 2) Test Results, including individual specimen values, to prove material meets the requirements of this specification 3) Filament lot number 4) Date of Manufacture 5) Raw Resin lot or batch number 6) A statement that no changes in product formulation, …

   https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-085-Rev-C-Base-Material-Spec-1-15-2020.pdf

3. PDF

   NPS-83800-Rev-B-TC380-October-22-2024

   …the purpose of specimen naming, this cure cycle is designated as “C.” The material qualification panels are processed in accordance with this baseline cure cycle. All temperatures are part temperatures. Steps 5 through 9 are based on the lagging thermocouple unless otherwise stated. 1. Prior to curing the laminate, leak check the bag to ensure a good seal.…

   https://www.wichita.edu/industry_and_defense/NIAR/Documents/NPS-83800-Rev-B-TC380-October-22-2024.pdf

4. PDF

   NMS-451-12-Rev-E-Aug-18-2021-MTM45-1-6781

   …is the dry side of the prepreg.” QUALIFIED PRODUCTS LIST: • Supplier Product Designation name was revised from “MTM45-1/6781-35%RW” to “MTM45-1-35%-S2SC758H-298-1270 (Formerly MTM45-1/6781-35%RW)”. • Supplier Name additional information was added, “Cytec Engineered Materials Inc.” and “(Cytec Engineered Materials Inc. is wholly owned subsidiary of…

   https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-451-12-Rev-E-Aug-18-2021-MTM45-1-6781.pdf

5. PDF

   NMS-125-Slash-1-Rev-B-AS4-12K-Unitape-11.18.2022

   …Change Notice (ACN). 2.1.2 Matrix: The thermoplastic polymer used to manufacture the prepreg must be Low Melt Polyaryletherketone (PAEK) with the commercial designation VICTREX AE™ 250 PAEK. Shear viscosity measured at 752°F (400°C) is 100-200 Pa-s. Visual and Dimensional Requirements: 2.2.1 Roll characteristics The standard width for this product is 54 mm…

   https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-125-Slash-1-Rev-B-AS4-12K-Unitape-11.18.2022.pdf

6. PDF

   NMS-451-4-Rev-D-Aug-18-2021-MTM45-1-7781

   …“theoretical nominal CPT” was revised to “calculated theoretical nominal CPT”. QUALIFIED PRODUCTS LIST: • Supplier Product Designation name was revised from “MTM45-1/GF0103-35%RW” to “MTM45-1-35%EGLASS-8H-293-1270 (Formerly MTM45-1/GF010335%RW)”. • Supplier Name additional information was added, “Cytec Engineered Materials Inc.” and “(Cytec Engineered…

   https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-451-4-Rev-D-Aug-18-2021-MTM45-1-7781.pdf

7. PDF

   NPS-82190-Rev-B-August-21-2025-EP2190-Process-Spec

   …is designated as “C”. The material qualification panels are processed in accordance with the baseline cure cycle. Check vacuum bag integrity prior to starting cure cycle; leak rate shall not exceed 1” of Hg in 2 minutes. All temperatures are panel temperatures based on the lagging thermocouple. The vacuum and temperatures shall be recorded at 5 minutes…

   https://www.wichita.edu/industry_and_defense/NIAR/Documents/NPS-82190-Rev-B-August-21-2025-EP2190-Process-Spec.pdf

8. PDF

   NPS-80530R-Repair-Process-Specification-12-22-2020

   …with the following process. For the purpose of maintaining traceability, this cure cycle is designated as “A.” All panels using this cure cycle shall be bagged using the bagging scheme in Figure 3 and cured using a hot bonder. Check the vacuum bag integrity prior to starting cure cycle; leak rate shall not exceed 1 inch of Hg in 5 minutes. The driving…

   https://www.wichita.edu/industry_and_defense/NIAR/Documents/NPS-80530R-Repair-Process-Specification-12-22-2020.pdf

9. PDF

   NPS-81225AFP-Rev-D-2-24-2026

   …as “C.” The material qualification panels are processed in accordance with the baseline consolidation cycle. Check each vacuum bag assembly for leak before beginning the consolidation cycle per 6.9. All temperatures are panel temperatures based on the lagging thermocouple. The vacuum and temperatures shall be recorded at 5-minute intervals maximum.…

   https://www.wichita.edu/industry_and_defense/NIAR/Documents/NPS-81225AFP-Rev-D-2-24-2026.pdf

10. PDF

    NMS_840_Rev_A_Base_Material_Spec_1.16.2026

    …to meet the specifications in TABLE 2, TABLE 3, TABLE 4 and TABLE 5. The report will include the following information: 1) Manufacturer name and product designation 2) Test Results, including individual specimen values, to prove material meets the requirements of this specification 3) Filament lot number 4) Date of Manufacture 5) Raw Resin lot or batch …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NMS_840_Rev_A_Base_Material_Spec_1.16.2026.pdf

11. PDF

    NMS_241F_Rev_A_Fabric_Base_Material_2.10.2026

    …fabric (RF). 1.2 Application: The reinforcement fabrics are intended for use in fabrication of structures in support of the aerospace industry. The materials are designed specifically for resin infusion. The reinforcement fabric may be used alongside qualified NCAMP Resin Material Specification and approved NCAMP Process Specification to produce…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NMS_241F_Rev_A_Fabric_Base_Material_2.10.2026.pdf

12. PDF

    NPS_82401_Rev-EP2400_VARTM_10.20.25

    …following process. For the purpose of specimen naming, this cure cycle is designated as “C.” The material qualification panels are processed in accordance with the baseline cure cycle. All temperatures are panel temperatures based on the lagging thermocouple. The vacuum and temperatures shall monitored throughout the cure process and where possible shall …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NPS_82401_Rev-EP2400_VARTM_10.20.25.pdf

13. PDF

    NMS-125-Slash-3-Rev-A-AS7-12K-Unitape-9.23.25

    …Change Notice (ACN). 2.1.2 Matrix: The thermoplastic polymer used to manufacture the prepreg must be Low Melt Polyaryletherketone with the commercial designation VICTREX LMPAEK™ . Shear viscosity measured at 752°F (400°C) is 100-200 Pa-s. 2.2 Visual and Dimensional Requirements: 2.2.1 Roll characteristics The standard width for this product is 54 mm …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NMS-125-Slash-3-Rev-A-AS7-12K-Unitape-9.23.25.pdf

14. PDF

    NMS_241F_slash_1_Rev_A_BA_DRNF_2.10.2026

    …EP2400 Resin Page 6 of 7 February 10, 2026 NMS 241F/1 Rev A QUALIFIED PRODUCTS LIST Supplier Product Designation Supplier Name and Production Location DRNF IM BA 0380 710091 Fiber Supplier Name: Teijin DRNF IM BA 0380 710092 Production Location: Teijin Carbon Europe GmbH Vitsstrasse 2 52525 Heinsberg Germany Textile Production Line: 2303 …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NMS_241F_slash_1_Rev_A_BA_DRNF_2.10.2026.pdf

15. PDF

    NMS-241F-slash-3_Rev-A-UD-Woven-DRWF_06-30-2025

    …EP2400 Resin (formerly Solvay) Page 6 of 7 June 30, 2025 NMS 241F/3 Rev A QUALIFIED PRODUCTS LIST Supplier Product Designation DRWF IM UD 0190 720004 Supplier Name and Production Location Fiber Supplier Name: Teijin Date Qualified May 2025 Production Location: C. Cramer & Co. GmbH Eper Straße 45-47 48619 Heek Germany Textile Production Line: 231x…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NMS-241F-slash-3_Rev-A-UD-Woven-DRWF_06-30-2025.pdf

16. PDF

    NMS_241F_slash_2_Rev_A_BD_DRNF_2.10.2026

    …(formerly Solvay) Page 6 of 7 February 10, 2026 NMS 241F/2 Rev A QUALIFIED PRODUCTS LIST Supplier Product Designation DRNF IM BD 0380 710089 DRNF IM BD 0380 710090 Supplier Name and Production Location Fiber Supplier Name: Teijin Date Qualified May 2025 Production Location: Teijin Carbon Europe GmbH Vitsstrasse 2 52525 Heinsberg Germany Textile…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NMS_241F_slash_2_Rev_A_BD_DRNF_2.10.2026.pdf

17. PDF

    NMS-800-Rev-A-Base-Material-Spec-10.4.2024

    …material’s ability to meet the specifications in Table 1 and Table 2. The report will include the following information: 1) Supplier name and product designation 2) Test Results, including individual specimen values, to prove material meets the requirements of this specification 3) Powder lot number 4) Date of Manufacture 5) A statement that no…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-800-Rev-A-Base-Material-Spec-10.4.2024.pdf

18. PDF

    BSWApp11.22.22

    …orientation, marital status, political affiliation, status as a veteran, genetic information or disability. The following person has been designated to handle inquiries regarding nondiscrimination policies: Director, Office of Equal Employment Opportunity, Wichita State University, 1845 Fairmount, Wichita KS 67260-0205; telephone (316) 978-6791. 6 BSW…

    https://www.wichita.edu/academics/fairmount_las/socialwork/BSW/_documents/BSWApp11.22.22.pdf

19. PDF

    Degreeworksheet2024

    …for MME or 60 minutes for MM (not including intermission). Undergraduate Recital Scheduled Outside the Designated Recital Hour - Undergraduate students are to schedule their recital during the School of Music designated degree recital hour on Tuesday or Thursday at 2:30 pm during the academic Fall or Spring semester. Undergraduate students who choose to …

    https://www.wichita.edu/academics/fine_arts/music/Degreeworksheet2024.pdf

20. PDF

    NFB_agreement_timline

    Task   Designate  an  Accessibility  Coordinator   Accessibility  coordinator  must  meet   requirements  set  forth  in  2a-­‐d.   Accessibility  Coordinator  Reports  and   Documents  semi-­‐annually  to  VP  of  Student   Affairs     Adopt  and  Disseminate  and  Post  Policies   (after…

    https://www.wichita.edu/academics/facultysenate/documents/NFB_agreement_timline.pdf