43 results · showing 41–43 · partial match · 101 ms

Search Results

  1. PDF

    Renegade-8HS-Quartz-fabric-CAM-RP-2024-007-Rev-A-10.8.25-MPDR

    … 101.9 101.3 101.6 97.03 104.5 105.1 103.2 102.8 86.45 2.191 2.535 80.77 90.16 18 102.1 1.963 1.922 97.03 105.1 18 Page 236 of 308 Avg. Specimen Thickness [in] 0.1310 0.1309 0.1305 0.1369 0.1376 0.1361 0.1373 0.1372 0.1381 0.1377 0.1378 0.1374 0.1379 0.1382 0.1375 0.1366 0.1377 0.1380 # Plies in Laminate Failure Mode Avg. tply [in] 2% Offset…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Renegade-8HS-Quartz-fabric-CAM-RP-2024-007-Rev-A-10.8.25-MPDR.pdf

  2. PDF

    Spirit-CAM-RP-2019-057_Hexcel-8552S-8HS-Fabric_Rev-7-16-25

    …conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM 21297-04004 bolts with NASM 21084 nuts and MS21206 washers for FHT and FHC 2) NASM 21297-04016 bolts with MS 21084 nuts and MS21206 washers for SSB For bearing tests, procedures and…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/Spirit-CAM-RP-2019-057_Hexcel-8552S-8HS-Fabric_Rev-7-16-25.pdf

  3. PDF

    CAM-RP-2023-007-NC-Additively-Manufactured-Hexpekk-100

    …temperature conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: NASM 21297-04004 bolts with MS 21084 nuts and MS 21206 washers for FHT, and FHC. NASM 21297-04017 bolts with MS 21084 nuts and MS 21206 washers for SSB. Open and Filled-Hole Tension specimens…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/CAM-RP-2023-007-NC-Additively-Manufactured-Hexpekk-100.pdf