8,600 results · showing 8581–8600 · partial match · 674 ms

Search Results

  1. PDF

    CAM-RP-2023-007-NC-Additively-Manufactured-Hexpekk-100

    …were installed after moisture conditioning. Unless otherwise specified, a tolerance of ±5°F applied to all temperature conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: NASM 21297-04004 bolts with MS 21084 nuts and MS 21206 washers for FHT, and…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/CAM-RP-2023-007-NC-Additively-Manufactured-Hexpekk-100.pdf

  2. PDF

    TC1225_5HS_Qualification_CAM-RP-2024-023_RevNC_MPDR_8-1-2025_Final

    …Bolt Countersink Washer (Head-Side) Flat Washer (Nut-Side) Nut NASM2129704004 MS21206-C4 MS21206-4 MS21084L04 NASM2129704004 MS21206-C4 MS21206-4 MS21084L04 NASM2129704016 MS21206-C4 MS21206-4 MS21084L04 FHT1 FHT2 FHT3 FHC1 FHC2 FHC3 SSB1 SSB2 SSB3 Table 1-1: Fastener Identifications Page 16 of 335 August 1, 2025 CAM-RP-2024-023 Rev N/C …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/TC1225_5HS_Qualification_CAM-RP-2024-023_RevNC_MPDR_8-1-2025_Final.pdf

  3. PDF

    UPSenateResponse

    …necessary for an ever-changing global community. We hope Wichita State has become a destination employer not only in the Wichita community, but academically as a mid-sized, public university. We hope we’ve improved our retention rates and graduated historic numbers of students in new and traditional programs. Moreover, we hope the entire Wichita State…

    https://www.wichita.edu/_archive/services/staffsenate/_documents/UPSenateResponse.pdf

  4. PDF

    T650-3k-70-PW-2

    … fasteners were used: 1) NASM 21297-04003 bolts with NASM 21084 nuts and MS21206 washers for FHT and FHC 2) NASM 21297-04013 bolts with MS 21084 nuts and MS21206 washers for SSB Page 13 of 237 July 27, 2012 CAM-RP-2010-082 Rev B 1.5.3 Test Matrix The tables below show the lay-ups and test matrices used for lamina and laminate level testing. Layup …

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5250-5/T650-3k-70-PW-2.pdf

  5. PDF

    Syensqo_EP2400_and_Teijin_NCF-CAM-RP-2024-020_Rev-11.05.2025

    …conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM 21297-04004 bolts with NASM 21084 nuts and MS21206 washers for FHT and FHC 2) NASM 21297-04016 bolts with MS 21084 nuts and MS21206 washers for SSB Page 15 of 477 November 05, 2025…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/Syensqo_EP2400_and_Teijin_NCF-CAM-RP-2024-020_Rev-11.05.2025.pdf

  6. PDF

    12k-HTS40-2

    …Fasteners were installed after moisture conditioning. Unless otherwise specified, a tolerance of ±5°F applied to all temperature conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM14181-04004 bolts with MS14182 nuts and MS14183 washers for FHT and…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/tencate-tc250/12k-HTS40-2.pdf

  7. PDF

    T650-6k-5HS-2

    … fasteners were used: 1) NASM 21297-04003 bolts with NASM 21084 nuts and MS21206 washers for FHT and FHC 2) NASM 21297-04013 bolts with MS 21084 nuts and MS21206 washers for SSB Page 13 of 247 July 27, 2012 CAM-RP-2010-076 Rev B 1.5.3 Test Matrix The tables below show the lay-ups and test matrices used for lamina and laminate level testing. Layup (warp…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5250-5/T650-6k-5HS-2.pdf

  8. PDF

    T650-Unitape-2

    …21297-04003 bolts with MS 21084 nuts and MS 21206 washers for FHT and FHC 2) NASM 21297-04013 bolts with MS 21084 nuts and MS 21206 washers for SSB Page 13 of 265 October 10, 2017 CAM-RP-2010-079 Rev C 1.5.3 Test Matrix The tables below show the lay-ups and test matrices used for lamina and laminate level testing. Layup Test Type and Direction…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5250-5/T650-Unitape-2.pdf

  9. PDF

    T650-3k-70-PW-2

    …21297-04003 bolts with MS 21084 nuts and MS 21206 washers for FHT and FHC. 2) NASM 14181-04016 bolts with MS 14182 nuts and MS 14183 washers for SSB. 1.5.2.3 Specimen Strain Device Used Corresponding Gage ID can be obtained from Appendix 1 of NTP 2202Q1. Uniaxial gages were used on: All of CTD Tension specimens except Warp Tension specimens. Two RTD Tension…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-ep2202/T650-3k-70-PW-2.pdf

  10. PDF

    TorayTC1225UnitapeCAM-RP-2019-036RevA5.10.2021MPDRFinal

    …Washer (Head-Side) Flat Washer (Nut-Side) Nut NASM2129704004 MS21206-C4 MS21206-4 MS21084L04 NASM2129704004 MS21206-C4 MS21206-4 MS21084L04 NASM2129704016 MS21206-C4 MS21206-4 MS21084L04 FHT1 FHT2 FHT3 FHC1 FHC2 FHC3 SSB1 SSB2 SSB3 Table 1-1: Fastener Identifications Page 15 of 443 May 10, 2021 CAM-RP-2019-036 Rev A 1.5.2.3Specimen…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/TorayTC1225UnitapeCAM-RP-2019-036RevA5.10.2021MPDRFinal.pdf

  11. PDF

    IM7G-Unitape-2

    …1) NASM 21297-04003 bolts with MS 21084 nuts and MS 21206 washers for FHT 1 and 3, and FHC 1, 2 and 3. 2) NASM 21297-04004 bolts with MS 21084 nuts and MS 21206 washers for FHT 2 and 3, and FHC 1, 2 and 3. 3) NASM 21297-04016 bolts with MS 21084 nuts and MS 21206 washers for SSB 1.5.2.3 Specimen Strain Device Used Corresponding Gage ID can be obtained…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-ep2202/IM7G-Unitape-2.pdf

  12. PDF

    T650-3k-PW-2

    …were used: 1) NASM 21297-04003 bolts with MS21206 washers and NASM 21084 nuts for FHT and FHC 2) NASM 21297-04016 bolts with MS21206 washers and MS 21084 nuts AND NASM 14181-04016 bolts with MS 14183 washes and MS 14182 nuts for SSB Page 13 of 294 October 13, 2015 CAM-RP-2012-017 Rev NC 1.5.3 Test Matrix The tables below show the lay-ups and test…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5320-1/T650-3k-PW-2.pdf

  13. PDF

    4708-Unitape-2

    … after moisture conditioning. Unless otherwise specified, a tolerance of ±5°F applied to all temperature conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM 21297-04003 bolts with MS21084 nuts and MS21206 washers for FHT and FHC 2) NASM…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/newport-nct4708/4708-Unitape-2.pdf

  14. PDF

    CAM-RP-2018-013-NC-Stratasys-Certified-ULTEM-9085-MPDR-Rev-A-12-02-20

    …a tolerance of ±5°F applied to all temperature conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: NASM 21297-04004 bolts with MS 21084 nuts and MS 21206 washers for FHT, and FHC. NASM 21297-04016 bolts with MS 21084 nuts and MS 21206 washers…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/CAM-RP-2018-013-NC-Stratasys-Certified-ULTEM-9085-MPDR-Rev-A-12-02-20.pdf

  15. PDF

    T650-Unitape-2

    … and MS 21206 washers for FHT and FHC1 2) NASM 14181-04004 bolts with MS 14182 nuts and MS14183 washers for FHC2 and FHC3 3) NASM 21297-04016 bolts with MS 21084 nuts and MS 21206 washers for SSB Page 14 of 317 January 27, 2017 CAM-RP-2013-002 Rev A 1.5.3 Test Matrix The tables below show the lay-ups and test matrices used for lamina and laminate …

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5320-1/T650-Unitape-2.pdf

  16. PDF

    afr_11

    … long-term investment returns on the State’s pooled funds and investments. The valuation assumed annual healthcare cost trend rates of 6.75% to 9.00% in the first ten years and 5.00% to 6.50% after ten years. The valuation followed generally accepted actuarial methods and included tests as considered necessary to assure the accuracy of the results. The UAAL …

    https://www.wichita.edu/_archive/services/controller/Accounting/_documents/afr_11.pdf

  17. PDF

    afr_12

    … pooled funds and investments. The valuation assumed annual healthcare cost trend rates of 6.75% to 9.00% in the first ten years and 5.00% to 6.50% after ten years. The valuation followed generally accepted actuarial methods and included tests as considered necessary to assure the accuracy of the results. The UAAL is being amortized over a 30-year open…

    https://www.wichita.edu/_archive/services/controller/Accounting/_documents/afr_12.pdf

  18. PDF

    afr_09

    … investment returns on the State’s pooled funds and investments. The valuation assumed annual healthcare cost trend rates of 5.50% to 10.00% in the first ten years and an ultimate rate of 5.00% after ten years. The valuation followed generally accepted actuarial methods and included tests as considered necessary to assure the accuracy of the results. The…

    https://www.wichita.edu/_archive/services/controller/Accounting/_documents/afr_09.pdf

  19. PDF

    afr_10

    …expected long-term investment returns on the State’s pooled funds and investments. The valuation assumed annual healthcare cost trend rates of 5.50% to 10.00% in the first ten years and an ultimate rate of 5.00% after ten years. The valuation followed generally accepted actuarial methods and included tests as considered necessary to assure the accuracy of …

    https://www.wichita.edu/_archive/services/controller/Accounting/_documents/afr_10.pdf

  20. PDF

    afr_13

    …returns on the State’s pooled funds and investments. The valuation assumed annual healthcare cost trend rates of 5.65% to 9.00% in the first ten years and 5.00% to 6.50% after ten years. The valuation followed generally accepted actuarial methods and included tests as considered necessary to assure the accuracy of the results. The UAAL is being…

    https://www.wichita.edu/_archive/services/controller/Accounting/_documents/afr_13.pdf