manufacturing – Search Results

PDF

Nanomechanical-Property-Characterization-of-Adhesive-Bondlines-olander

…versus configured part manufacturing Olander, R., 12 #23-176607-ETT 4/26/2023 Nanomechanical Analysis RROI #23-176607-ETT Olander, R., 13 ritaj2@uw.edu 4/26/2023 Nanomechanical Characterization • Hysitron TriboIndenter 980 with Berkovich diamond indenter tip • Indent surface from tens of nanometers to several micrometers deep • Built-in digital…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/Nanomechanical-Property-Characterization-of-Adhesive-Bondlines-olander.pdf

PDF

DFSCA_Annual_Notice_2-19

…facilitates, or constitutes excessive and/or rapid alcohol consumption including, but not limited to, keg stands, alcohol luges, beer bongs, and drinking games. 7. Manufacturing and/or Producing Alcohol Engaging in the manufacture or production of any alcoholic beverage including, but not limited to, cereal malt beverage (beer), wine, moonshine, and…

https://www.wichita.edu/about/clery/_documents/DFSCA_Annual_Notice_2-19.pdf

PDF

Test_Method_Development_for_Environmental_Durability_of_Bonded_Joints-Adams

…for assessing adhesive bond durability • Standard includes a good description of test specimen • Additional guidance needed in specimen manufacturing • More detail required in test procedure • Lacking sufficient guidance regarding conditions and requirements that constitute an acceptable metal bonded joint 4 REVISION OF WEDGE TEST METHOD:…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/Test_Method_Development_for_Environmental_Durability_of_Bonded_Joints-Adams.pdf

PDF

afr_16

…fiscal year. The majority of the increase was due to a $1.3 million increase in a Multi‐Robotic Additive Manufacturing or MRAM grant. • Sales and services of educational activities increased $4.0 million, or 14.7% from FY 2015. Most of the increase, $2.8 million, was in research and specifically in professional charges and fees. Total non‐operating…

https://www.wichita.edu/_archive/services/controller/Accounting/_documents/afr_16.pdf

PDF

T650-3k-PW-2

…should assume that the material property data published in this report is not applicable when the material is not procured to NMS 323/3. NMS 323/3 is a free, publicly available, nonproprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not…

https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5215/T650-3k-PW-2.pdf

PDF

T650-6k-5HS-2

…should assume that the material property data published in this report is not applicable when the material is not procured to NMS 323/2. NMS 323/2 is a free, publicly available, nonproprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not…

https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5215/T650-6k-5HS-2.pdf

PDF

AS4-PW-2

…(PCD), fiber specification, fiber PCD, and other raw material specifications and PCDs which impose essential quality controls on the raw materials and raw material manufacturing equipment and processes. Aircraft companies and certifying agencies should assume that the material property data published in this report is not applicable when the material …

https://www.wichita.edu/industry_and_defense/NIAR/Research/hexcel-8552/AS4-PW-2.pdf

PDF

AS4-Unitape-2

…(PCD), fiber specification, fiber PCD, and other raw material specifications and PCDs which impose essential quality controls on the raw materials and raw material manufacturing equipment and processes. Aircraft companies and certifying agencies should assume that the material property data published in this report is not applicable when the material…

https://www.wichita.edu/industry_and_defense/NIAR/Research/hexcel-8552/AS4-Unitape-2.pdf

PDF

T40-800-Unitape-2

…property data published in this report is not applicable when the material is not procured to NMS 323/1. NMS 323/1 is a free, publicly available, nonproprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not exceed the cost of…

https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5215/T40-800-Unitape-2.pdf

PDF

AA_FAAR-CV_Aug24plus

…Control Of Robotic Systems In Webots Using Control Barrier Functions." (August 15, 2024 - July 15, 2025). Advised: Aaditya Acharya Master's Thesis Committee Member, "Smart Manufacturing Analytics: Root Cause Analysis and Predictive Decision-Making in Aerospace Quality Control." (August 15, 2024 - May 15, 2025). Advised: Siddharth Alagiri Master's Thesis …

https://www.wichita.edu/academics/engineering/ECE/research/CAPPLab/_documents/PDF/AA_FAAR-CV_Aug24plus.pdf

PDF

AMTAS_SAMPE2024JAMS

…RROI# 24-181587-ETT 6/14/2024 Nanomechanical and Nanochemical Anaylsis Olander, R., 16 ritaj2@uw.edu 6/14/2024 Nanoindentation Methodology • Hysitron TriboIndenter 980 with Berkovich diamond indenter tip • Indent surface from tens of nanometers to several micrometers deep • Extreme Property Mapping (XPMTM) • Hardness and reduced modulus mapped…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/AMTAS_SAMPE2024JAMS.pdf

PDF

Adhesive-Bond-Qualification-Guidance-Seneviratne

…of the Bonded Structure 1. General size 2. Mechanical property requirement for bonded joints 3. Environmental envelope 4. Manufacturing requirements 5. Analysis of critical bonded joint types seen in the structure 6. Bondline thickness requirements Bond Process Qualification and Protocol Generation Bond Process Qualification Plan and Protocol…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations-2021/Adhesive-Bond-Qualification-Guidance-Seneviratne.pdf

PDF

1045-Tuttle_JAMS_2017

…Type, to avoid any potential manufacturing bias Type A (as-produced) B (thermally cycled) C (humid) D (humid&thermally Cycled) 1-1 2-1 3-1 4-1 2-2 3-2 4-2 1-2 Specimen Number 3-3 4-4 4-3 1-4 1-3 2-4 2-3 3-4 1-5 2-5 3-5 4-5 2-6 3-6 4-6 1-6 SCB Tests Conducted During 1st Year of Study •“Witness” panels were also fabricated. They were instrumented…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations/1045-Tuttle_JAMS_2017.pdf

PDF

Service_Learning_Impact_Report-2019

… of Liberal Arts & Sciences School of Social Work Course: SCWK 302- Skills and Techniques of Practice Laila Cure College of Engineering Industrial, Systems, and Manufacturing Engineering Course: IME 452- Work Systems Breanna Boppre Fairmount College of Liberal Arts & Sciences School of Criminal Justice Course: CJ 318/783 AZ- Women, Crime, and Criminal…

https://www.wichita.edu/_archive/academics/academic_affairs/servicelearning/Service_Learning_Impact_Report-2019.pdf

PDF

T1400_WSU_Salah_Teardown

…that additional curing may have occurred in the upper skin due to UV exposure (overall at least 95% cure was achieved in the structure) Significant improvements in composite manufacturing processes and NDI methods New material resin system thermal properties comparable to old material but strength is higher (fiber processing improvement) Teardown…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/T1400_WSU_Salah_Teardown.pdf

PDF

Renegade-8HS-Quartz-fabric-CAM-RP-2024-007-Rev-A-10.8.25-MPDR

…published in this report is not applicable when the material is not procured to NMS 201/1. NMS 201/1 is a free, publicly available, nonproprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not exceed the cost of reproduction (e.g. printing) …

https://www.wichita.edu/industry_and_defense/NIAR/Documents/Renegade-8HS-Quartz-fabric-CAM-RP-2024-007-Rev-A-10.8.25-MPDR.pdf

PDF

CAM-RP-2021-025_Rev_NC_Victrex_LMPAEK_AS4_12k_Uni_MPDR_01-13-26

…in this report is not applicable when the material is not procured to NMS 125/1. NMS 125/1 is a free, publicly available, nonproprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not exceed the cost of reproduction (e.g. printing) and…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/CAM-RP-2021-025_Rev_NC_Victrex_LMPAEK_AS4_12k_Uni_MPDR_01-13-26.pdf

PDF

Spirit-CAM-RP-2019-057_Hexcel-8552S-8HS-Fabric_Rev-7-16-25

…should assume that the material property data published in this report is not applicable when the material is not procured to NMS 128/4. NMS 128/4 is a free, publicly available, nonproprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/Spirit-CAM-RP-2019-057_Hexcel-8552S-8HS-Fabric_Rev-7-16-25.pdf

PDF

T1440_WSU_Seneviratne

…Environments,, .. – Bonded joints, interlaminar shear, sandwich, .. 1000000 100000 Number of Cycles • 10000 1000 100 10 1 1000 10000 Stress (psi) • Realistic analysis approach for scatter – Appropriate analysis y techniques for diverse design g details – User-friendly automated procedures – Notch effects on scatter for damage tolerance…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/T1440_WSU_Seneviratne.pdf

PDF

Advanced-Fiber-Reinforced-Andrulonis-Lovingfoss

…Rachael Andrulonis – WSU-NIAR JAMS Technical Review – September 29, 2021 Joint Centers of Excellence for Advanced Materials Federal Aviation Administration Chopped Fiber Thermoplastic Processing Joint Centers of Excellence for Advanced Materials Industry Partner: Sekisui QForge® Molding Process 1 2 Preparation of Charge Preparation of…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations-2021/Advanced-Fiber-Reinforced-Andrulonis-Lovingfoss.pdf