additive manufacturing – Search Results

PDF

Adhesive-Bond-Qualification-Guidance-Seneviratne

…of the Bonded Structure 1. General size 2. Mechanical property requirement for bonded joints 3. Environmental envelope 4. Manufacturing requirements 5. Analysis of critical bonded joint types seen in the structure 6. Bondline thickness requirements Bond Process Qualification and Protocol Generation Bond Process Qualification Plan and Protocol…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations-2021/Adhesive-Bond-Qualification-Guidance-Seneviratne.pdf

PDF

1045-Tuttle_JAMS_2017

…Type, to avoid any potential manufacturing bias Type A (as-produced) B (thermally cycled) C (humid) D (humid&thermally Cycled) 1-1 2-1 3-1 4-1 2-2 3-2 4-2 1-2 Specimen Number 3-3 4-4 4-3 1-4 1-3 2-4 2-3 3-4 1-5 2-5 3-5 4-5 2-6 3-6 4-6 1-6 SCB Tests Conducted During 1st Year of Study •“Witness” panels were also fabricated. They were instrumented…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations/1045-Tuttle_JAMS_2017.pdf

PDF

Service_Learning_Impact_Report-2019

… of Liberal Arts & Sciences School of Social Work Course: SCWK 302- Skills and Techniques of Practice Laila Cure College of Engineering Industrial, Systems, and Manufacturing Engineering Course: IME 452- Work Systems Breanna Boppre Fairmount College of Liberal Arts & Sciences School of Criminal Justice Course: CJ 318/783 AZ- Women, Crime, and Criminal…

https://www.wichita.edu/_archive/academics/academic_affairs/servicelearning/Service_Learning_Impact_Report-2019.pdf

PDF

T1400_WSU_Salah_Teardown

…that additional curing may have occurred in the upper skin due to UV exposure (overall at least 95% cure was achieved in the structure) Significant improvements in composite manufacturing processes and NDI methods New material resin system thermal properties comparable to old material but strength is higher (fiber processing improvement) Teardown…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/T1400_WSU_Salah_Teardown.pdf

PDF

Renegade-8HS-Quartz-fabric-CAM-RP-2024-007-Rev-A-10.8.25-MPDR

…published in this report is not applicable when the material is not procured to NMS 201/1. NMS 201/1 is a free, publicly available, nonproprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not exceed the cost of reproduction (e.g. printing) …

https://www.wichita.edu/industry_and_defense/NIAR/Documents/Renegade-8HS-Quartz-fabric-CAM-RP-2024-007-Rev-A-10.8.25-MPDR.pdf

PDF

CAM-RP-2021-025_Rev_NC_Victrex_LMPAEK_AS4_12k_Uni_MPDR_01-13-26

…in this report is not applicable when the material is not procured to NMS 125/1. NMS 125/1 is a free, publicly available, nonproprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not exceed the cost of reproduction (e.g. printing) and…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/CAM-RP-2021-025_Rev_NC_Victrex_LMPAEK_AS4_12k_Uni_MPDR_01-13-26.pdf

PDF

Spirit-CAM-RP-2019-057_Hexcel-8552S-8HS-Fabric_Rev-7-16-25

…should assume that the material property data published in this report is not applicable when the material is not procured to NMS 128/4. NMS 128/4 is a free, publicly available, nonproprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/Spirit-CAM-RP-2019-057_Hexcel-8552S-8HS-Fabric_Rev-7-16-25.pdf

PDF

T1440_WSU_Seneviratne

…Environments,, .. – Bonded joints, interlaminar shear, sandwich, .. 1000000 100000 Number of Cycles • 10000 1000 100 10 1 1000 10000 Stress (psi) • Realistic analysis approach for scatter – Appropriate analysis y techniques for diverse design g details – User-friendly automated procedures – Notch effects on scatter for damage tolerance…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/T1440_WSU_Seneviratne.pdf

PDF

Advanced-Fiber-Reinforced-Andrulonis-Lovingfoss

…Rachael Andrulonis – WSU-NIAR JAMS Technical Review – September 29, 2021 Joint Centers of Excellence for Advanced Materials Federal Aviation Administration Chopped Fiber Thermoplastic Processing Joint Centers of Excellence for Advanced Materials Industry Partner: Sekisui QForge® Molding Process 1 2 Preparation of Charge Preparation of…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations-2021/Advanced-Fiber-Reinforced-Andrulonis-Lovingfoss.pdf

PDF

Victrex-LMPAEK-AS7-UDT-CAM-RP-2025-009-Rev-9.15.25

…in this report is not applicable when the material is not procured to NMS 125/3. NMS 125/3 is a free, publicly available, non-proprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not exceed the cost of reproduction (e.g. printing) and…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/Victrex-LMPAEK-AS7-UDT-CAM-RP-2025-009-Rev-9.15.25.pdf

PDF

TheEffectsofDamageand-Livne

…and damage effects. • Statistics of flight operations (flight speeds exceedances) • Statistics of inspections and repair. • Automated rapid aeroelastic model generation, flutter simulations, results extraction and storage. • Monte Carlo simulations. To obtain: • Flutter statistics and flutter reliability assessment for composite airplanes. •…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/TheEffectsofDamageand-Livne.pdf

PDF

EP2190-IMS65-UNI-CAM-RP-2022-001-Rev-9.18.2025-MPDR

…459 10.1.2 Phase 2 ............................................................................................ 459 10.1.3 Phase 3 ............................................................................................ 459 10.2 Prepreg, Testing and Data Submission Dates…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/EP2190-IMS65-UNI-CAM-RP-2022-001-Rev-9.18.2025-MPDR.pdf

PDF

330_Wednesday_Siegmund

…Behavior is Strain Rate Dependent • voids always present due to manufacturing method (casting) • initiation of failure leads to immediate cross-width fracture and thus can not develop significant plastic deformation 4000 Stress, psi bulk dogbone partially successful main issues: – premature failure – not measuring entire constitutive curve 3000 – …

https://www.wichita.edu/industry_and_defense/NIAR/Documents/330_Wednesday_Siegmund.pdf

PDF

EP2190-T650-3KPW-Fabric-CAM-RP-2022-002-Rev-9-18-2025-MPDR

…459 9.1.2 Phase 2 ............................................................................................ 459 9.1.3 Phase 3 ............................................................................................ 459 9.2 Prepreg, Testing and Data Submission Dates…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/EP2190-T650-3KPW-Fabric-CAM-RP-2022-002-Rev-9-18-2025-MPDR.pdf

PDF

430_Wednesday_Horn

…of the UAS manufacturing community. The Joint Advanced Materials and Structures Center of Excellence 19 New Direction of Project • Distill Subparts C and D of the CFR 14 Part 23 to a set of key requirements • Contact UAS contacts to get information on their compliance with the key requirements of Sub-Parts C and D • Construct a matrix to…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/430_Wednesday_Horn.pdf

PDF

430_Tuesday_Burford

…& certification • Controls & acceptance criteria – Organized & certified design data • MMPDS (Mil HDBK 5) type data • S, A, & B basis – Design Parameters and Process Guides • Process & performance Specifications • Comparative data: FSSW vs. resistance spot welds and rivets • Future needs – Continued program support for implementation Wichita State…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/430_Tuesday_Burford.pdf

PDF

Tenax-E-TPCL-PEEK-HTA40-E13-3K-5HS-CAM-RP-2019-007-MPDR03-08--Final

…not applicable when the material is not procured to NMS 401/3. NMS 401/3 is a free, publicly available, nonproprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not exceed the cost of reproduction (e.g. printing) and distribution (e.g.…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/Tenax-E-TPCL-PEEK-HTA40-E13-3K-5HS-CAM-RP-2019-007-MPDR03-08--Final.pdf

PDF

RC-Spring2013

…of those interviews and the literature review results led to the formation of a survey instrument. The survey was then distributed to over 800 manufacturing businesses. The results of that survey are the basis of this article. 4 The goal of the research was to gain a better understanding of how IOS and supply chain integration (SCI) are related. …

https://www.wichita.edu/academics/business/research-connection/_documents/RC-Spring2013.pdf

PDF

Qual-CAM-RP-2009-015-Rev-B-Hexcel-8552-IM7-MPDR-04.16.19

…property data published in this report is not applicable when the material is not procured to NMS 128/2. NMS 128/2 is a free, publicly available, non-proprietary aerospace industry material specification. The data contained in this report is intended for general distribution to the public, either freely or at a price that does not exceed the cost of…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/Qual-CAM-RP-2009-015-Rev-B-Hexcel-8552-IM7-MPDR-04.16.19.pdf

PDF

TC1225_5HS_Qualification_CAM-RP-2024-023_RevNC_MPDR_8-1-2025_Final

…in this report is not applicable when the material is not procured to NMS 122/3. NMS 122/3 is a free, publicly available, non-proprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not exceed the cost of reproduction (e.g. printing) and…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/TC1225_5HS_Qualification_CAM-RP-2024-023_RevNC_MPDR_8-1-2025_Final.pdf