3,104 results · showing 2441–2460 · 296 ms

Search Results

  1. PDF

    NMS-818-slash-16-RevA

    … (for NMS 752/1 Nelcote E752 AS7 145 gsm Unitape) Prepared by: Yeow Ng, John Tomblin Reviewed by: Ryan Civalier (Hexcel), LaRhea McBee (Hexcel), Jeffrey A. Bue (Lockheed Martin - Aero), Munir Zanial (Bombardier) The specification is intended for general distribution to the public, either freely or at a price that does not exceed the cost of reproduction…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/nms818/NMS-818-slash-16-RevA.pdf

  2. PDF

    NMS-818-slash-10-RevD

    …Tenax-J HTS40 E13) (Old Designation: Tenax-J G30-500 HTA-7C EP03) (for NMS 451/13 G30-500 3K plain weave fabric Solvay (Formerly Cytec) MTM45-1 prepreg) (for NMS 752/3 Park Aerospace Technologies Corp. (Formerly Nelcote) E752 G30-500 3K PW) Prepared by: Yeow Ng (NCAMP), John Tomblin (NCAMP), Vinsensius Tanoto (NCAMP) Reviewed by: Mark E. Engle…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/nms818/NMS-818-slash-10-RevD.pdf

  3. PDF

    T1000_FIU_Zhou

    …Dharam Persaud, Juanjuan Zhou, Yao Ge • FAA Technical Monitor – David Westlund, Curtis Davies • Industry Participation – Exponent, Bombardier, DME, Avborne, AeroMatrix The Joint Advanced Materials and Structures Center of Excellence 2 Introduction • Motivation and Key Issues – Adhesive bonding is now used in manufacture and repair and is beginning…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/T1000_FIU_Zhou.pdf

  4. PDF

    NMS-201-Base-Material-Spec-2024-08-7

    …(NCAMP), Thomas Sutter (Renegade Materials Corporation) and Kyle Kersher (Renegade Materials Corporation) Reviewed by: Royal Lovingfoss (NCAMP/NIAR), Joe Spangler (Preferred Aero), Thomas Sutter (Renegade Materials Corporation) and Kyle Kersher (Renegade Materials Corporation) Distribution Statement A. Approved for public release; distribution is…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-201-Base-Material-Spec-2024-08-7.pdf

  5. PDF

    800_Wednesday_Yang

    …& Researchers Hyoung Seock Seo, PhD candidate Pouy Chang, PhD candidate Jacob Hundley, PhD student Professor H. Thomas Hahn Professor Jenn-Ming Yang Department of Mechanical & Aerospace Engineering Department Materials Science Engineering University of California, Los Angeles • FAA Technical Monitor – Mr. Curtis Davies • Other FAA Personnel Involved – …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/800_Wednesday_Yang.pdf

  6. PDF

    NPS-86754-Rev-D-Markforged-Onyx-X7-Process-Spec-3-4-2024

    …acceptable aesthetic anomalies that may present themselves in the finished CFR part, along with their allowable limit(s). Page 18 of 43 March 4, 2024 NPS 86754 Rev D Table 12. Acceptable Part Quality Anomalies Definition Allowable Limit Blip Small negative feature of missing material on the outer shell of the part. Blips must not extend beyond a …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NPS-86754-Rev-D-Markforged-Onyx-X7-Process-Spec-3-4-2024.pdf

  7. PDF

    NCP-RP-2023-007-RevNC-Markforged-OFRA-CFRA-SAR-11.10.2023

    …and test specimens have been inspected by NCAMP Authorized Inspection Representatives (AIR) and the testing has been witnessed by NCAMP Authorized Engineering Representatives (AER). However, the data may not fulfill all the needs of any specific company's program; specific properties, environments, build orientations, fiber placement, and loading…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCP-RP-2023-007-RevNC-Markforged-OFRA-CFRA-SAR-11.10.2023.pdf

  8. PDF

    HybridCert-WSeneviratne

    …Davies • Industry Participation – Airbus, Boeing, Bombardier, Bell Helicopter, Cessna, Honda Aircraft Co., NAVAIR, and Spirit Aerosystems 4 Approach Metallic COMPOSITES - Guidance is need to make Hybrid Structure Compliance with Regulations Certification Inspections Damage Tolerance Testing Damage Damage Tolerance Analysis Residual Strength…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/HybridCert-WSeneviratne.pdf

  9. PDF

    1115_Wednesday_Stevenson

    …and Structures Center of Excellence Pre-Repair Surface Inspection and Post repair Evaluation of Cure State Using Near Infrared Spectroscopy Motivation and Key Issues To help US Aero Space manufacturers of large composite parts produce and maintain a better product in a more cost effective manner Objective To remove some of the qualitative judgements that…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/1115_Wednesday_Stevenson.pdf

  10. PDF

    NPS-89800-Rev-B-Process-Spec-10.4.2024

    …using Laser Powder Bed Fusion on EOS P800 printer Prepared by: Alden Winn (Hexcel), Michelle Man (NCAMP), Jonathan John (NCAMP) Reviewed by: Royal Lovingfoss (NCAMP/NIAR), Rachael Andrulonis (NIAR), Curtis Davies (FAA), John Tomblin (NIAR), Steve Ward (Collins Aerospace), Michael Puzin (Airbus), Lauren Rezac (NCAMP AER) Distribution Statement A.…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NPS-89800-Rev-B-Process-Spec-10.4.2024.pdf

  11. PDF

    NMS-219-Rev-B-August-21-2024-EP2190-Base-Material-Spec

    …(“unidirectional tape and fabric prepreg”). 1.2 Application: These composite prepreg material systems are intended for use in the fabrication of aerospace structures and tooling substrate. The materials are designed specifically for vacuum-bag autoclave cure in accordance with NPS 82190 and/or NPS 82190AFP baseline cure cycle “C”. Material property data …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-219-Rev-B-August-21-2024-EP2190-Base-Material-Spec.pdf

  12. PDF

    Toray-TC380-T1100GC-24K-Uni-NCP-RP-2025-010-Rev-10-03-25-SAR

    …by NCAMP Authorized Engineering Representatives (AER). B-Basis values, A-estimates, and B-estimates were calculated using a variety of techniques that are detailed in section 2. The qualification material was procured to NCAMP Material Specification NMS 380/1 Rev – dated May 2, 2024. The qualification test panels were cured in accordance with NCAMP …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Toray-TC380-T1100GC-24K-Uni-NCP-RP-2025-010-Rev-10-03-25-SAR.pdf

  13. PDF

    Toray-TC1225-LM-PAEK-T700GC-UNI-Qualification-NCP-RP-2025-008-RevA-2-24-2026-SAR-Final

    Report No: NCP-RP-2025-008 Rev A Report Date: February 24, 2026 Toray Cetex® TC1225 (LM PAEK) T700GC 145 gsm 34% RC Unsized Fiber Unidirectional Slit Tape (0.25 inch) Material Allowables Statistical Analysis Report NCAMP Project Number: NPN 052101 NCAMP Report Number: NCP-RP-2025-008 Rev A Report Date: February 24, 2026 Testing Facility: National Institute …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Toray-TC1225-LM-PAEK-T700GC-UNI-Qualification-NCP-RP-2025-008-RevA-2-24-2026-SAR-Final.pdf

  14. PDF

    W0820_UW_Livne

    The Effects of Damage and Uncertainty on the Aeroelastic / Aeroservoelastic Behavior and Safety of Composite Aircraft Presented by Professor Eli Livne Department of Aeronautics and Astronautics University of Washington JAMS Meeting, July 2009 1 Contributors • • • • • Department of Aeronautics and Astronautics • Dr. Eli Livne – PI, Professor…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/W0820_UW_Livne.pdf

  15. PDF

    CMH-17-CMC-Testing-WG-Meeting-11-19-2024-v2-compressed

    CMH-17 CMC Testing Working Group Meeting November 19th, 2024 CMC Testing WG Co-chairs Bob Zhou – GE Aerospace, yuanxin.zhou@geaerospace.com Matt Opliger – WSU-NIAR, matthew.opliger@idp.wichita.edu 1 Agenda • • • • Introductions Vision and Goals Overview of CMC Testing WG Sections (Volume 5, Part C, Chapters 8-15) Review and Discuss: – Finished Sections…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/CMH-17-CMC-Testing-WG-Meeting-11-19-2024-v2-compressed.pdf

  16. PDF

    930_Tuesday_Adams

    …of adhesive joints Objectives: • Determine the influence of bondline thickness on the shear properties of aerospace adhesives • Develop test methodology for shear characterization of adhesives. Approach: Use of V-notched Iosipescu shear specimen developed for composite materials The Joint Advanced Materials and Structures Center of Excellence 11…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/930_Tuesday_Adams.pdf

  17. PDF

    SethOBrien-CorrelationofULTEM-9085PhysicalChemicalMechanicalProperties-DJR

    …– PLA 378.3 lb-in/g – Nylon 610.9 lb-in/g • Flame, smoke, and toxicity (FST) characteristics • Currently used in aerospace and transportation sectors – One of only FAA approved! 5 ULTEM 9085 Qualification Background • Planned and tested between 2016-2019 for the first PBAM qualification • Tested at NIAR • Analyzed by NCAMP statistician • Coupons printed …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/SethOBrien-CorrelationofULTEM-9085PhysicalChemicalMechanicalProperties-DJR.pdf

  18. PDF

    NMS-800-Slash-1-Rev-B-10.4.2024

    …Corp. or affiliates Prepared by: Alden Winn (Hexcel), Royal Lovingfoss (NCAMP/NIAR), Michelle Man (NCAMP), Jonathan John (NCAMP) Reviewed by: John Tomblin (NCAMP/NIAR), Rachael Andrulonis (NCAMP/NIAR), Steve Ward (Collins Aerospace), Lauren Rezac (NCAMP AER) Distribution Statement A. Approved for public release; distribution is unlimited. National…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-800-Slash-1-Rev-B-10.4.2024.pdf

  19. PDF

    825_Tuesday_Davies

    …• Propulsion/Fuel Systems • Fire Research & Safety • Risk Analysis • Flight Safety • General Aviation /Vertical Flight (F&E) • Unmanned Aerial Systems The Joint Advanced Materials and Structures Center of Excellence 5 Airport and Aircraft Safety Research and Development Facilities • • • • • • Aircraft Components Fire Test Facility Air Flow…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/825_Tuesday_Davies.pdf

  20. PDF

    DelaminationDisbondArrestFeaturesinAircraftCompositeStructures-Richard-Lin

    …Luke Richard and Kuen Y. Lin University of Washington JAMS Technical Review March 31-April 1, 2015 Sponsored Project Information • Principal Investigator: • Dr. Kuen Y. Lin, Aeronautics and Astronautics, UW • Research Assistant: Luke Richard UW • FAA Technical Monitor: Lynn Pham • Other FAA Personnel: Curtis Davies, Larry Ilcewicz • Industry …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/DelaminationDisbondArrestFeaturesinAircraftCompositeStructures-Richard-Lin.pdf