374 results · showing 341–360 · partial match · 121 ms

Search Results

  1. PDF

    CAM-RP-2023-007-NC-Additively-Manufactured-Hexpekk-100

    …temperature conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: NASM 21297-04004 bolts with MS 21084 nuts and MS 21206 washers for FHT, and FHC. NASM 21297-04017 bolts with MS 21084 nuts and MS 21206 washers for SSB. Open and Filled-Hole Tension specimens…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/CAM-RP-2023-007-NC-Additively-Manufactured-Hexpekk-100.pdf

  2. PDF

    NMS_241_Rev-Laminate_Base_Material_10.20.2025

    …exposure to UV light and moisture. 6.1.5 Normal ground shipment temperature not exceeding 50°C (122°F). Page 16 of 17 October 20, 2025 7 NMS 241 Rev - ACKNOWLEDGEMENT: A vendor shall mention this specification number and the applicable detail specification number and their revision letters, if any, in all quotations and when acknowledging purchase …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NMS_241_Rev-Laminate_Base_Material_10.20.2025.pdf

  3. PDF

    NMS-085-Rev-C-Base-Material-Spec-1-15-2020

    …by manufacturer and drying parameters is added, Note 3, 4, 5, and 6 were revised accordingly. “Ambient” was clarified as “Dry Ambient” Section 12: PO was removed. Section 22: “vendor” was replaced with “manufacturer”. Revision table was moved to after cover page. Page 2 of 15 January 15, 2021 NMS 085 Rev C TABLE OF CONTENTS 1. 2. 3. 4. 5. 6. 7.…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-085-Rev-C-Base-Material-Spec-1-15-2020.pdf

  4. PDF

    NMS_241R-Rev-Resin-Base-Material_10.20.2025

    …6.2.2 If requested by the supplier and documented on the purchase order, retain temperature recording instruments (if used) for return to the supplier. 7 ACKNOWLEDGEMENT: A vendor shall mention this specification number and the applicable detail specification number and their revision letters, if any, in all quotes and when acknowledging purchase…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NMS_241R-Rev-Resin-Base-Material_10.20.2025.pdf

  5. PDF

    AM-ALL-compressed

    …no longer in business and a new start on production is cost inhibitive and wont meet the schedule 13.3 Challenges in AM Implementation Lack of Allowables, specifications, only vendor data available 13.4 Design Methodology 13.4.1 Design Driver FS&T, light pressure load, non critical component, No ESD compliance needed 13.4.2 13.4.2 13.4.3 Process…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/AM-ALL-compressed.pdf

  6. PDF

    10-21-2014

    …Technology Fair is in progress today between 11am – 2pm at the Rhatigan Student Center. There are a record number of 48 tables this year including one from the contracted copier vendor. c. Awards/Recognition – Gabrielle Dodosh reported that this committee would not begin work for another couple of months. d. Grievance – Frankie Kirkendoll reported that…

    https://www.wichita.edu/_archive/services/staffsenate/_documents/10-21-2014.pdf

  7. PDF

    NCAMPNRP102CarbonFiberPCDPreparationandMaintenanceGuideMarch2...

    …to NCAMP or the purchaser is required. Level 1 Changes – These changes typically involve the use of an identical auxiliary material or equipment. An example is an alternate vendor for chemically and physically identical auxiliary raw material (there should be compelling data verifying that the alternate material is identical to the original material).…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NCAMPNRP102CarbonFiberPCDPreparationandMaintenanceGuideMarch2....pdf

  8. PDF

    MTM45-1-NCAMP-Material-Base-Specification-new

    …30,000 ppm for short-term exposure) before entering the truck bed. Consult Occupational Safety & Health Administration (OSHA) for more safety information. 6. ACKNOWLEDGEMENT: A vendor shall mention this specification number and the applicable detail specification number and their revision letters, if any, in all quotations and when acknowledging purchase …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/MTM45-1-NCAMP-Material-Base-Specification-new.pdf

  9. PDF

    NMS-125-Rev-C-Victrex-LMPAEK-Material-Spec-9.20.2025

    …the supplier and documented on the purchase order, retain the shipping container, spools, and temperature recording instruments for return to the supplier. 6 ACKNOWLEDGEMENT: A vendor shall mention this specification number and the applicable detail specification number and their revision letters, if any, in all quotations and when acknowledging purchase …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NMS-125-Rev-C-Victrex-LMPAEK-Material-Spec-9.20.2025.pdf

  10. PDF

    NMS-397-Rev-A-March-3-2025-3960-Base-Material-Spec

    …30,000 ppm for short-term exposure) before entering the truck bed. Consult Occupational Safety & Health Administration (OSHA) for more safety information. 6. ACKNOWLEDGEMENT: A vendor must mention this specification number and the applicable detail specification number and their revision letters, if any, in all quotations and when acknowledging purchase…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-397-Rev-A-March-3-2025-3960-Base-Material-Spec.pdf

  11. PDF

    02-16-2016

    … Accept/Decline – March 21-31  Elections – April 4-15 f. UPS Website – Kevin Crabtree  No update g. RSC Board of Directors – Lyston Skerritt  They are currently looking at food vendor possibilities – starting discussions h. Traffic Appeals – Eric Maki and Sheelu Surender  No January meeting  February – 2 written appeals (both upheld) / 5 in person (4…

    https://www.wichita.edu/_archive/services/staffsenate/_documents/02-16-2016.pdf

  12. PDF

    NCT4708-NCAMP-Material-Base-Specification

    …30,000 ppm for short-term exposure) before entering the truck bed. Consult Occupational Safety & Health Administration (OSHA) for more safety information. 6. ACKNOWLEDGEMENT: A vendor shall mention this specification number and the applicable detail specification number and their revision letters, if any, in all quotations and when acknowledging purchase …

    https://www.wichita.edu/industry_and_defense/NIAR/Research/newport-nct4708/NCT4708-NCAMP-Material-Base-Specification.pdf

  13. PDF

    5215-NCAMP-Material-Base-Specification

    …30,000 ppm for short-term exposure) before entering the truck bed. Consult Occupational Safety & Health Administration (OSHA) for more safety information. 6. ACKNOWLEDGEMENT: A vendor shall mention this specification number and the applicable detail specification number and their revision letters, if any, in all quotations and when acknowledging purchase …

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5215/5215-NCAMP-Material-Base-Specification.pdf

  14. PDF

    JMADD_and_JMADX-SAMPE_2025_v2

    …• • • • • • • Create common mixed-orientation build design for fabrication and performance comparison across builds. Fabricate specimens from one common material lot and vendor. Post-process and machine per test matrix definition. Generate fatigue curves for comparison to JMADD baseline. Include E8 static tensile lot release, density, thermal, and …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/JMADD_and_JMADX-SAMPE_2025_v2.pdf

  15. PDF

    NMS_122_Base_Rev_D_August-1-2025

    …retain the shipping container, spools, and temperature recording instruments for return to the supplier. Page 19 of 20 August 1, 2025 6. NMS 122 Rev D ACKNOWLEDGEMENT: A vendor shall mention this specification number and the applicable detail specification number and their revision letters, if any, in all quotations and when acknowledging purchase …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NMS_122_Base_Rev_D_August-1-2025.pdf

  16. PDF

    NMS_241F_Rev_A_Fabric_Base_Material_2.10.2026

    …and documented on the purchase order, retain the shipping container, spools, and temperature recording instruments (if used) for return to the supplier. 7 ACKNOWLEDGEMENT: A vendor shall mention this specification number and the applicable detail specification number and their revision letters, if any, in all quotes and when acknowledging purchase…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NMS_241F_Rev_A_Fabric_Base_Material_2.10.2026.pdf

  17. PDF

    NMS-380-TC380-Rev-A-October-2-2025

    …30,000 ppm for shortterm exposure) before entering the truck bed. Consult Occupational Safety & Health Administration (OSHA) for more safety information. 6 ACKNOWLEDGEMENT A vendor shall mention this specification number and the applicable detail specification number and their revision letters, if any, in all quotations and when acknowledging purchase …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-380-TC380-Rev-A-October-2-2025.pdf

  18. PDF

    NMS-219-Rev-B-August-21-2024-EP2190-Base-Material-Spec

    …30,000 ppm for short-term exposure) before entering the truck bed. Consult Occupational Safety & Health Administration (OSHA) for more safety information. 6. ACKNOWLEDGEMENT: A vendor shall mention this specification number and the applicable detail specification number and their revision letters, if any, in all quotations and when acknowledging purchase …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-219-Rev-B-August-21-2024-EP2190-Base-Material-Spec.pdf

  19. PDF

    NMS-401-Base-Rev-B-02-02-2023

    … the supplier and documented on the purchase order, retain the shipping container, spools, and temperature recording instruments for return to the supplier. 6. ACKNOWLEDGEMENT: A vendor shall mention this specification number and the applicable detail specification number and their revision letters, if any, in all quotations and when acknowledging purchase …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-401-Base-Rev-B-02-02-2023.pdf

  20. PDF

    NMS-201-Base-Material-Spec-2024-08-7

    …30,000 ppm for short-term exposure) before entering the truck bed. Consult Occupational Safety & Health Administration (OSHA) for more safety information. 6. ACKNOWLEDGEMENT: A vendor shall mention this specification number and the applicable detail specification number and their revision letters, if any, in all quotations and when acknowledging purchase …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-201-Base-Material-Spec-2024-08-7.pdf