manufacturing – Search Results

PDF

SAMPE_2025_MSU_2

…box FAA - Technology Readiness for Un/Stitched Resin Infusion 14 stacks 98 plies 4 stacks 28 plies 7 stacks 49 plies 6/4/2025 Confidential 2 Wing Box Progression -- Manufacturing Race tracking caused a vacuum cut-off, causing a large dry area on the back of the spar. Pressure pot/ Saertex NCF High resin viscosity due to low ambient temperatures …

https://www.wichita.edu/industry_and_defense/NIAR/Documents/SAMPE_2025_MSU_2.pdf

PDF

ACG-IM7-Uni-CAM-RP-2008-007-Rev-C-2.12.2024-MPDR-FINAL

…8, added fabricated and “Machined” at ACG - Section 4.10 changed RTD graph to CTD - Removed gridlines from all tables with gridlines and modified deviations to explain manufacturing problems 4/22/2010 4/21/2011 Report No: CAM-RP-2008-007 Rev C Report Date: February 12, 2024 Rev A Date 4/21/2011 Pages Revised or Added Introduction/Scope Section 1.1…

https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-mtm45-1/ACG-IM7-Uni-CAM-RP-2008-007-Rev-C-2.12.2024-MPDR-FINAL.pdf

Word doc

Baldwin_CV2021-February

…in a UAV Target Orientation Detection Task. In, Karwowski, W., and Salvendy, G., (Editors), 2010, Advances in Human Factors, Ergonomics, and Safety in Manufacturing and Service Industries, CRC Press, Taylor & Francis: London. Baldwin, C. L., Coyne, J. T., & Christensen, J. (2012). EEG Metrics of Workload and Learner Engagement. In M.…

https://www.wichita.edu/academics/fairmount_las/psychology/documents/Baldwin_CV2021-February.docx

PDF

NMS-085-Slash-1-Rev-A-Material-Spec-15-2021

…2021 1. SCOPE: 1.1 Form: NMS 085/1 Rev A This detailed specification along with the base specification NMS 085 establishes the requirements for the manufacturing of ULTEM 9085 Aerospace Fused Deposition Modeling (FDM) filament. The filament is produced using an extrusion process. This detailed specification follows the section and table numbering…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-085-Slash-1-Rev-A-Material-Spec-15-2021.pdf

PDF

CGRS_2025_abstracts

… PROPERTIES OF HDPE FOR COMMERCIAL APPLICATIONS Grant Howard, Jacob Culross, Paul Herring, and Jeanne Norton Pittsburg State University Modern plastics manufacturing methods create significant waste including sprues, runners, flash, trim, and out-of-spec parts. To reduce the carbon footprint of the plastic industry, post-industrial waste materials are often …

https://www.wichita.edu/academics/graduate_school/cgrs/_documents/CGRS_2025_abstracts.pdf

PDF

CGRSAbstractBooklet_2017

… are used widely in many parts of the economy, such as building construction, transportation, agriculture, manufacturing, energy production, and mining. However, cracking issues due to galvanizing process cost repair budgets, and pose safety concerns for the public, especially when the structures are placed in high-density traffic areas. If a galvanized…

https://www.wichita.edu/academics/graduate_school/cgrs/_documents/CGRSAbstractBooklet_2017.pdf

PDF

TC250-NCAMP-Material-Base-Specification

…in this area. 3.10.2 Equivalency is limited to the evaluation of minor changes in a material’s constituents, manufacturing process, or fabrication (e.g. curing) process used with a material. Significant changes to the prepreg material will require a full qualification program and a separate specification. 3.10.3 It is the responsibility of the material …

https://www.wichita.edu/industry_and_defense/NIAR/Research/tencate-tc250/TC250-NCAMP-Material-Base-Specification.pdf

PDF

5320-1-NCAMP-Material-Base-Specification

…guidance in this area. 3.10.2 Equivalency is limited to the evaluation of minor changes in a material’s constituents, manufacturing process, or fabrication (e.g. curing) process used with a material. Significant changes to the prepreg material will require a full qualification program and a separate specification. 3.10.3 It is the responsibility of the…

https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5320-1/5320-1-NCAMP-Material-Base-Specification.pdf

PDF

BT250E-6-NCAMP-Material-Base-Specification

…in this area. 3.10.2 Equivalency is limited to the evaluation of minor changes in a material’s constituents, manufacturing process, or fabrication (e.g. curing) process used with a material. Significant changes to the prepreg material will require a full qualification program and a separate specification. 3.10.3 It is the responsibility of the material…

https://www.wichita.edu/industry_and_defense/NIAR/Research/tencate-bt250e-6/BT250E-6-NCAMP-Material-Base-Specification.pdf

PDF

5250-5-NCAMP-Material-Base-Specification

…this area. 3.10.2 Equivalency is limited to the evaluation of minor changes in a material’s constituents, manufacturing process, or fabrication (e.g. curing) process used with a material. Significant changes to the prepreg material will require a full qualification program and a separate specification. 3.10.3 It is the responsibility of the material supplier…

https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5250-5/5250-5-NCAMP-Material-Base-Specification.pdf

PDF

EP2202-NCAMP-Material-Base-Specification

…guidance in this area. 3.10.2 Equivalency is limited to the evaluation of minor changes in a material’s constituents, manufacturing process, or fabrication (e.g. curing) process used with a material. Significant changes to the prepreg material will require a full qualification program and a separate specification. 3.10.3 It is the responsibility of the…

https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-ep2202/EP2202-NCAMP-Material-Base-Specification.pdf

PDF

NMS-800-Slash-1-Rev-B-10.4.2024

…, 2024 1. SCOPE: 1.1 Form: NMS 800/1 Rev B - This detailed specification along with the base specification NMS 800 establishes the requirements for the manufacturing of aerospace laser powder bed fusion (LPBF) powder. The base specification shall govern where no additional requirement is specified; in such cases, the applicable sections are omitted…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-800-Slash-1-Rev-B-10.4.2024.pdf

PDF

Spring2021programforweb

…Karaj University, Iran INDUSTRIAL ENGINEERING Thesis: Cost Estimation in Additive Manufacturing Tate Douglas Lampe BSIE Wichita State University INDUSTRIAL ENGINEERING Michelle Ledermann Pommier BBA Wichita State University MANAGEMENT SCIENCE AND SUPPLY CHAIN MANAGEMENT Amani Saida Khalloud BS ESITH, Casablanca MANAGEMENT SCIENCE AND SUPPLY CHAIN…

https://www.wichita.edu/_archive/about/commencement/documents/Spring2021programforweb.pdf

PDF

Park-Aerospace-Corp-7781-E765-Glass-CAM-RP-2023-010-Rev-NC-MPDR-2-25-25

…fiber specification, fiber PCD and other raw material specifications and PCDs which impose essential quality controls on the raw materials and raw material manufacturing equipment and processes. Aircraft companies and certifying agencies should assume that the material property data published in this report is not applicable when the material is not…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/Park-Aerospace-Corp-7781-E765-Glass-CAM-RP-2023-010-Rev-NC-MPDR-2-25-25.pdf

PDF

JAMS-2025_Arola_short

Characterizing Mechanical Property Variability in Ti6Al4V produced by Laser Powder Bed Fusion Additive Manufacturing Dwayne Arola1,2, Mamidala Ramulu1,2 Alex Montelione1, Rick Schleusener1, Aaron Abeyta1, Daniel Lund1 1Materials Science and Engineering, 2Mechanical Engineering, UW, Seattle, WA FAA Technical Monitors: Kevin Stonaker and Ahmet Oztekin May…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/JAMS-2025_Arola_short.pdf

PDF

3-Flinn-Improving-Adhesive-Bonding

…(40 min exposure) – FEP – Surface combing • Panels cured and machined DCB Panel Production • P1: Closed Immediately • P2: FEP removal after 40 min • P3: No mitigation after 40 min • P4: Comb after 40 min 27 DCB Mitigation Results • Average fracture toughness values are statistically the same • Failure predominantly cohesive within the substrates for…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations/3-Flinn-Improving-Adhesive-Bonding.pdf

PDF

Annual_Security_Report_2022

… deadly weapons; carrying deadly weapons, concealed or openly; using, manufacturing, etc., of silencers; furnishing deadly weapons to minors; aliens possessing deadly weapons; attempts to commit any of the above. 4. Drug Abuse Violations: The violation of laws prohibiting the production, distribution and/or use of certain controlled substances and the…

https://www.wichita.edu/about/clery/_documents/Annual_Security_Report_2022.pdf

PDF

NMS-754-1-Rev-B_Slash-Sheet_11-13-23

…5 November 13, 2023 1. NMS 754/1 Rev B SCOPE This detailed specification along with the base specifications NMS 754 and NMS 755 establishes the requirements for the manufacturing of Onyx FR-A with Carbon Fiber FR-A Aerospace Fused Filament Fabrication (FFF) filament/fiber. The filament/fiber is produced using an extrusion process. This detailed…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-754-1-Rev-B_Slash-Sheet_11-13-23.pdf

PDF

afr_23

… south side of the track. Phase 1A and Phase 1B are scheduled to be complete by May 2025. • Design for the NIAR Hub for Advanced Manufacturing Research building is under way and is expected to break ground soon on the Innovation Campus. The 150,000-square-foot building is partly funded by an EDA grant and will house advanced manufacturing research labs and…

https://www.wichita.edu/_archive/services/controller/Accounting/_documents/afr_23.pdf

PDF

W0800_UW_TuttleFeraboli

…• Motivation – Discontinuous fiber composites (DFC) are being used in aircraft and automotive structures because (relative to continuous fiber composites): - ease of manufacturing complex parts - high delamination resistance - near quasi-isotropic in-plane stiffness and reasonable in-plane strengths - high out-of-plane strength-stiffness - low…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/W0800_UW_TuttleFeraboli.pdf