manufacturing – Search Results

PDF

Victrex-LMPAEK-AS7-UDT-CAM-RP-2025-009-Rev-9.15.25

…in this report is not applicable when the material is not procured to NMS 125/3. NMS 125/3 is a free, publicly available, non-proprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not exceed the cost of reproduction (e.g. printing) and…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/Victrex-LMPAEK-AS7-UDT-CAM-RP-2025-009-Rev-9.15.25.pdf

PDF

TheEffectsofDamageand-Livne

…and damage effects. • Statistics of flight operations (flight speeds exceedances) • Statistics of inspections and repair. • Automated rapid aeroelastic model generation, flutter simulations, results extraction and storage. • Monte Carlo simulations. To obtain: • Flutter statistics and flutter reliability assessment for composite airplanes. •…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/TheEffectsofDamageand-Livne.pdf

PDF

EP2190-IMS65-UNI-CAM-RP-2022-001-Rev-9.18.2025-MPDR

…459 10.1.2 Phase 2 ............................................................................................ 459 10.1.3 Phase 3 ............................................................................................ 459 10.2 Prepreg, Testing and Data Submission Dates…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/EP2190-IMS65-UNI-CAM-RP-2022-001-Rev-9.18.2025-MPDR.pdf

PDF

330_Wednesday_Siegmund

…Behavior is Strain Rate Dependent • voids always present due to manufacturing method (casting) • initiation of failure leads to immediate cross-width fracture and thus can not develop significant plastic deformation 4000 Stress, psi bulk dogbone partially successful main issues: – premature failure – not measuring entire constitutive curve 3000 – …

https://www.wichita.edu/industry_and_defense/NIAR/Documents/330_Wednesday_Siegmund.pdf

PDF

EP2190-T650-3KPW-Fabric-CAM-RP-2022-002-Rev-9-18-2025-MPDR

…459 9.1.2 Phase 2 ............................................................................................ 459 9.1.3 Phase 3 ............................................................................................ 459 9.2 Prepreg, Testing and Data Submission Dates…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/EP2190-T650-3KPW-Fabric-CAM-RP-2022-002-Rev-9-18-2025-MPDR.pdf

PDF

430_Wednesday_Horn

…of the UAS manufacturing community. The Joint Advanced Materials and Structures Center of Excellence 19 New Direction of Project • Distill Subparts C and D of the CFR 14 Part 23 to a set of key requirements • Contact UAS contacts to get information on their compliance with the key requirements of Sub-Parts C and D • Construct a matrix to…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/430_Wednesday_Horn.pdf

PDF

430_Tuesday_Burford

…& certification • Controls & acceptance criteria – Organized & certified design data • MMPDS (Mil HDBK 5) type data • S, A, & B basis – Design Parameters and Process Guides • Process & performance Specifications • Comparative data: FSSW vs. resistance spot welds and rivets • Future needs – Continued program support for implementation Wichita State…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/430_Tuesday_Burford.pdf

PDF

Tenax-E-TPCL-PEEK-HTA40-E13-3K-5HS-CAM-RP-2019-007-MPDR03-08--Final

…not applicable when the material is not procured to NMS 401/3. NMS 401/3 is a free, publicly available, nonproprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not exceed the cost of reproduction (e.g. printing) and distribution (e.g.…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/Tenax-E-TPCL-PEEK-HTA40-E13-3K-5HS-CAM-RP-2019-007-MPDR03-08--Final.pdf

PDF

CAM-RP-2023-007-NC-Additively-Manufactured-Hexpekk-100

…material process control document (PCD) and other raw material specifications and PCDs which impose essential quality controls on the raw materials and raw material manufacturing equipment and processes. Aircraft companies and certifying agencies should assume that the material property data published in this report is not applicable when the material is not…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/CAM-RP-2023-007-NC-Additively-Manufactured-Hexpekk-100.pdf

PDF

RC-Spring2013

…of those interviews and the literature review results led to the formation of a survey instrument. The survey was then distributed to over 800 manufacturing businesses. The results of that survey are the basis of this article. 4 The goal of the research was to gain a better understanding of how IOS and supply chain integration (SCI) are related. …

https://www.wichita.edu/academics/business/research-connection/_documents/RC-Spring2013.pdf

PDF

Qual-CAM-RP-2009-015-Rev-B-Hexcel-8552-IM7-MPDR-04.16.19

…property data published in this report is not applicable when the material is not procured to NMS 128/2. NMS 128/2 is a free, publicly available, non-proprietary aerospace industry material specification. The data contained in this report is intended for general distribution to the public, either freely or at a price that does not exceed the cost of…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/Qual-CAM-RP-2009-015-Rev-B-Hexcel-8552-IM7-MPDR-04.16.19.pdf

PDF

TC1225_5HS_Qualification_CAM-RP-2024-023_RevNC_MPDR_8-1-2025_Final

…in this report is not applicable when the material is not procured to NMS 122/3. NMS 122/3 is a free, publicly available, non-proprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not exceed the cost of reproduction (e.g. printing) and…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/TC1225_5HS_Qualification_CAM-RP-2024-023_RevNC_MPDR_8-1-2025_Final.pdf

PDF

JAMS_2025_CMC-Opliger_5-19-2025

… methodology • Report has been revised to provide recommendations for qualification and equivalency with Key: added content discussing topics for which the approach has not yet been validated in CMCs (e.g., equivalency and acceptance testing) In-work • Revised document with FAA for review Planned Slide: 25 GUIDANCE ON WRITING MATERIAL SPECIFICATIONS Title:…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/JAMS_2025_CMC-Opliger_5-19-2025.pdf

PDF

115_Tuesday_Heider_Hughes

…membrane’s performances The Joint Advanced Materials and Structures Center of Excellence 29 Aerospace VARTM Requires Elevated Temperature Processing ¾ Sensor Based Infusion Technology ¾ Robust System Construction ¾ Re-Configurable Infusion Schemes ¾ Improved Resin Mixing System ¾ Statistical Data Sampling During Infusion & Stag0 ¾ Electronic Work…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/115_Tuesday_Heider_Hughes.pdf

PDF

T650-3k-70-PW-2

…should assume that the material property data published in this report is not applicable when the material is not procured to NMS 226/3. NMS 226/3 is a free, publicly available, nonproprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not…

https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5250-5/T650-3k-70-PW-2.pdf

PDF

Syensqo_EP2400_and_Teijin_NCF-CAM-RP-2024-020_Rev-11.05.2025

… specifications and PCDs which impose essential quality controls on the raw materials and raw material manufacturing equipment and processes. Aircraft companies and certifying agencies should assume that the material property data published in this report is not applicable when the material is not procured to NMS 241 series. These specifications are a free, …

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/Syensqo_EP2400_and_Teijin_NCF-CAM-RP-2024-020_Rev-11.05.2025.pdf

PDF

12k-HTS40-2

…fiber specification, fiber PCD, and other raw material specifications and PCDs which impose essential quality controls on the raw materials and raw material manufacturing equipment and processes. Aircraft companies and certifying agencies should assume that the material property data published in this report is not applicable when the material is not…

https://www.wichita.edu/industry_and_defense/NIAR/Research/tencate-tc250/12k-HTS40-2.pdf

PDF

T650-6k-5HS-2

…should assume that the material property data published in this report is not applicable when the material is not procured to NMS 226/2. NMS 226/2 is a free, publicly available, nonproprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not…

https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5250-5/T650-6k-5HS-2.pdf

PDF

Thermoplastic_Joining-Materials-Guidance-Seneviratne

… High-performance thermoplastic resin systems with reinforcement are attractive to aircraft structural applications due to: • Ability to integrate into automated manufacturing methods & apply unique processing methods (welding) » increase in production rates at low cost • Less stringent cleanroom requirements & material can be stored at ambient temperatures …

https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations-2021/Thermoplastic_Joining-Materials-Guidance-Seneviratne.pdf

PDF

T650-Unitape-2

…property data published in this report is not applicable when the material is not procured to NMS 226/1. NMS 226/1 is a free, publicly available, nonproprietary aerospace industry material specification. The data in this report is intended for general distribution to the public, either freely or at a price that does not exceed the cost of…

https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-5250-5/T650-Unitape-2.pdf