ai – Search Results

PDF

NMS-755-Rev-B_Carbon-Fiber-FR-A_11-13-23

NMS 755 Rev B Date: November 13, 2023 Document No.: NMS 755, Revision B, November 13, 2023 NCAMP Material Specification This specification is generated and maintained in accordance with NCAMP Standard Operating Procedures, NSP 100 Filament Specification (Carbon Fiber FR-A™) (Markforged - MFD) Prepared by: John Tomblin (NCAMP/NIAR), Neville Tay…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-755-Rev-B_Carbon-Fiber-FR-A_11-13-23.pdf

PDF

W1300_UW_RassainFeraboli

…of Composite Materials (End of Year II) Presented at the JAMS review meeting Wichita, KS July 21-22, 2009 Prof. Paolo Feraboli University of Washington 1 1 Dr. Mostafa Rassaian Boeing Research & Technology Outline Motivation Complete lack of standards and accepted practices in testing and analysis of composites under crash conditions Benefits to …

https://www.wichita.edu/industry_and_defense/NIAR/Documents/W1300_UW_RassainFeraboli.pdf

PDF

NPS_85321_Rev_D_8.12.2025_5320-1_Process_Spec

NPS 85321 Rev D Date: August 12, 2025 Document No.: NPS 85321, Revision D, August 12, 2025 NCAMP Process Specification This specification is generated and maintained in accordance with NCAMP Standard Operating Procedures, NSP 100 Fabrication of NMS 532 Qualification, Equivalency, and Acceptance Test Panels (Solvay (formerly Cytec) Cycom 5320-1) Prepared…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NPS_85321_Rev_D_8.12.2025_5320-1_Process_Spec.pdf

PDF

CACRC-Lamia

CACRC Depot Bonded Repair Investigation – Round Robin Testing 2013 Technical Review John Tomblin and Lamia Salah National Institute for Aviation Research Wichita State University CACRC Depot Bonded Repair Investigation – Round Robin Testing Principal Investigators & Researchers -John Tomblin Ph.D., Lamia Salah Ph.D. -Chathuranga Kuruppuarachchige,…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/CACRC-Lamia.pdf

PDF

JAMS2024-FAA-RBT

… 4 Background • • Evaluation of bond line integrity and durability of adhesively bonded composite rotor blades is imperative to the safe operation. Retired blades from aged aircraft are will be • • • • Thoroughly Inspected with numerous NDI techniques. Physically tested with high-stress low-cycle loading conditions. Torn apart to perform small scale…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/JAMS2024-FAA-RBT.pdf

PDF

NMS-380-TC380-Rev-A-October-2-2025

… Document No.: NMS 380, Revision A, October 2, 2025 NCAMP Material Specification 350F Autoclave Cure, Toughened Epoxy Prepregs Toray TC380 This specification is generated and maintained in accordance with NCAMP Standard Operating Procedures, NSP 100 Prepared by: Reviewed by: Vinsensius Tanoto (NCAMP) Russell Kirkman (Toray TAC), Joe Feskanin (Toray TAC),…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-380-TC380-Rev-A-October-2-2025.pdf

PDF

5915-01-Exp-08-31-2026

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 NATIONAL INSTITUTE FOR AVIATION RESEARCH (NIAR) – ENVIRONMENTAL TEST LAB 3800 S Oliver Wichita, KS 67210 Reid Owens 620-655-5686 email: reid.owens@idp.wichita.edu ELECTRICAL Valid to: August 31, 2026 Certificate Number: 5915.01 In recognition of the successful completion of the A2LA evaluation process,…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/5915-01-Exp-08-31-2026.pdf

PDF

840_Tuesday_Ilcewicz

…1) Work with industry, other government agencies, and academia to ensure safe and efficient deployment of composite technologies used in existing and future aircraft 2) Update policies, advisory circulars, training, and detailed background used to support standardized composite practices * Efforts started in 1999 to address issues associated with…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/840_Tuesday_Ilcewicz.pdf

PDF

NPS-82190-Rev-B-August-21-2025-EP2190-Process-Spec

NPS 82190 Rev B Date: August 21, 2025 Document No.: NPS 82190, Revision B, August 21, 2025 NCAMP Process Specification This specification is generated and maintained in accordance with NCAMP Standard Operating Procedures, NSP 100 Fabrication of NMS 219 Qualification, Equivalency, and Acceptance Test Panels Syensqo (Formerly Solvay) EP2190 prepregs Prepared…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NPS-82190-Rev-B-August-21-2025-EP2190-Process-Spec.pdf

PDF

Composite_Thermal_Damage_Measurement-Flinn

…than metals – Incipient thermal damage occurs below traditional NDE detection limits • Objective – Determine if handheld FTIR can detect thermal damage and guide repair • Approach – Characterize panels with controlled thermal damage and perform repair based on FTIR inspection 2 FAA Sponsored Project Information • Principal Investigators &…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/Composite_Thermal_Damage_Measurement-Flinn.pdf

PDF

NPS-80530R-Repair-Process-Specification-12-22-2020

NPS 80530R Rev Date: December 22, 2020 Document No.: NPS 80530R Rev -, December 22, 2020 Process Specification for Composite Bonded Repair Material Test Panels using Solvay 5320-1 Prepreg (Cured using a Composite Repair Console) Prepared by: John Tomblin, Rachael Andrulonis, Jeff Gilchrist, Royal Lovingfoss Reviewed by: Eric Chesmar, Phil Croft, Rusty…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NPS-80530R-Repair-Process-Specification-12-22-2020.pdf

PDF

NPS-81225AFP-Rev-D-2-24-2026

…Distribution Statement A. Approved for public release; distribution is unlimited. National Center for Advanced Materials Performance Wichita State University – NIAR 1845 Fairmount Ave., Wichita, KS 67260-0093, USA Page 1 of 30 February 24, 2026 NPS 81225AFP Rev D REVISIONS Rev - By Ethan McDaniel Date Description 5/17/2024 Initial release. …

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NPS-81225AFP-Rev-D-2-24-2026.pdf

PDF

Toray-3960-Uni-CAM-RP-2024-004-Rev-A-9.4.25-MPDR-DRAFT

…15 1.5.1 Process Definition ................................................................................. 15 1.5.2 Specimen & Testing Details .................................................................. 17 1.5.2.1 Tabbing ..................................................................................... 17…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/Toray-3960-Uni-CAM-RP-2024-004-Rev-A-9.4.25-MPDR-DRAFT.pdf

PDF

EP2190-IMS65-UNI-CAM-RP-2022-001-Rev-9.18.2025-MPDR

…2025 Testing Facility: Fluid SBS Testing Facility: Solvay 1440 N Kraemer Blvd Anaheim, CA 92806 National Institute for Aviation Research Wichita State University 1845 N. Fairmount Wichita, KS 67260 Test Panel Fabrication Facility: Solvay 1440 N Kraemer Blvd Anaheim, CA 92806 Prepreg Manufacture Facility: Solvay Wrexham Industrial Estate Abenbury Way…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/EP2190-IMS65-UNI-CAM-RP-2022-001-Rev-9.18.2025-MPDR.pdf

PDF

IndustryFeedback

…solutions for metal Presenters – All did an excellent job Perspective Large Tier 1 supplier to the aviation industry – Largest supplier to Boeing and Airbus Design, manufacture, test and certify Growing use of advanced materials – Section 41 on Boeing 787 – Cab and cabin on CH-53 Summary Comments Great work on repair and bonding and…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/IndustryFeedback.pdf

PDF

NCAMP-289-3-Instruction-Guide-August-18-2022

…any testing activity, the AER must verify the following but not limited to: a. All the panels and specimens have been inspected by the designated NCAMP AIR, this inspection record is documented in Inspection Verification Record NCAMP Form 168-1 paperwork. Panels and specimens with unsatisfied characteristics listed in Form 168-1 will require engineering…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NCAMP-289-3-Instruction-Guide-August-18-2022.pdf

PDF

NPS_81225_Rev_E_July-30-2025

…specification covers prepreg cutting, layup and consolidation process with a static press. This specification does not contain all the necessary information typically required in a composite process specification for the fabrication of composite structures, such as personnel qualification and layup room requirements. Users should refer to their existing…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NPS_81225_Rev_E_July-30-2025.pdf

PDF

NCAMPPrepregPCDPreparationandMaintenanceGuideRevB

February 22, 2008 NRP 101 Rev B Document No.: NRP 101 Prepreg Process Control Document (PCD) Preparation and Maintenance Guide Prepared by: Yeow Ng, John Tomblin Reviewed by: John Adelmann, Kit Bowman, Sunny Clarkson (Lockheed Martin Aero), Steve Ellery (Hexcel), Richard Fields, William McCarvill, Amador Motos (Adam Aircraft), David Ostrodka (FAA), Dusty …

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NCAMPPrepregPCDPreparationandMaintenanceGuideRevB.pdf

PDF

Core-Material-qualification-guidance-for-aircraft-design-and-cert-bsaathoff

Core Material Qualification Guidance for Aircraft Design and Certification John Tomblin, Rachael Andrulonis, Royal Lovingfoss, Nicole Stahl & Brandon Saathoff April 19th, 2023 Presented by: Brandon L. Saathoff Senior Research Engineer WSU-NIAR JAMS 2023 Technical Review – Seattle, WA Research Team NIAR • • • • • John Tomblin, PhD Rachael Andrulonis Royal…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/Core-Material-qualification-guidance-for-aircraft-design-and-cert-bsaathoff.pdf

PDF

18-Parmigiani-Evaluation-of-Parameters

… for both matrix tension and compression in Abaqus (often with the same parameters) Damage propagation Final failure Displacement • A linear elastic region culminating in the point of maximum load carrying ability at damage initiation • A linear plastic region beginning at damage initiation, including all damage propagation, and ending with no load…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations/18-Parmigiani-Evaluation-of-Parameters.pdf