applied engineering – Search Results

PDF

JAMSCMCAndrulonis

…applied stress is defined as a percentage of either the ultimate stress or peak stress, as appropriate, as determined by static testing on the same batch of material. • One set of coupons for each test type will be reserved for either testing at an additional stress level or testing at an identical stress level but a higher or lower temperature. This…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/JAMSCMCAndrulonis.pdf

PDF

NMS-754-Rev-B_Onyx-FR-A_11-13-2023

…production lines are approved to produce Onyx FR-A and are controlled by the PCD. Table 3 - Approved Production Lines Line ID Location EX01 - Labtech Engineering 30 mm x 30:1 Markforged located at 4 Suburban Park Drive, Billerica, L/D Extrusion Workstation MA 01821 5. QUALIFICATION All requests for qualification must be directed to NCAMP. Page 5…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NMS-754-Rev-B_Onyx-FR-A_11-13-2023.pdf

PDF

development-of-process-spec-and-quality-assurance-of-slit-tape-for-AFP-Seneviratne

… Blade buildup caused issues after ~1000ft continuous. Standard rewinding parameters applied. Removing poly pre-cut results in fiber pull Removing poly post-cut prevents error 29 Summary • • • • In order to meet the quality requirements associated with AFP/ATL process, it is imperative that the slitting process produce slit tape to meet required…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/development-of-process-spec-and-quality-assurance-of-slit-tape-for-AFP-Seneviratne.pdf

PDF

Ceramic-Matrix-Composite-Materials-Guidelines-Opliger

…• Relative applied stress is defined as a percentage of either the ultimate stress or peak stress, as appropriate, as determined by static testing on the same batch of material. • One set of coupons for each test type will be reserved for either testing at an additional stress level or testing at an identical stress level but a higher or lower temperature.…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations-2021/Ceramic-Matrix-Composite-Materials-Guidelines-Opliger.pdf

PDF

Core-Materials-Qualification-Stahl

…cycle will be a co-cure of the facesheets and core. See below. 1. Ramp from RT to 350F+/-10F at 3-5F/min. Full vacuum is applied (roughly around 26-27”Hg). Ramp pressure at 27psi. 2. Start vacuum reduction at 15psi+/-5psi, must be fully removed by 22psi+/-5psi. 3. Max pressure reached at 45psi +/-5psi, hold that pressure through cure cycle until…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations-2021/Core-Materials-Qualification-Stahl.pdf

PDF

TheEffectsofDamageand-Livne

… Contributors • • • • • Department of Aeronautics and Astronautics • Dr. Eli Livne – PI, Professor • Sang Wu – PhD student Department of Mechanical Engineering • Francesca Paltera, PhD student • Dr. Mark Tuttle, co-PI, professor and chairman Boeing Commercial, Seattle • Dr. James Gordon, Associate Technical Fellow, Flutter Methods Development • Dr.…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/TheEffectsofDamageand-Livne.pdf

PDF

T1040_WSU_Stevenson

… prior to bonding has been previously determined. We have now shown that this technique may be applied to the characterization of other intractable materials such as, for example, polyimide based composites and nanoparticle filled epoxy based composites prior to bonding The Joint Advanced Materials and Structures Center of Excellence 25 A Look Forward •…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/T1040_WSU_Stevenson.pdf

PDF

Service_Learning_Impact_Report-2025

… by Service-Learning Faculty Fellows: Rhonda K. Lewis, Ph.D., MPH Fairmount College of Liberal Arts and Sciences Chelsea Redger-Marquardt, Ed.D. Cohen Honors College | College of Applied Studies HIGHLIGHTS Annual Conference Presentation Redger-Marquardt, C.& Lewis R.K., ServiceLearning and Partnership Building. National Collegiate Honors Council Annual…

https://www.wichita.edu/_archive/academics/academic_affairs/servicelearning/Service_Learning_Impact_Report-2025.pdf

PDF

FAA_JAMS_Surface-Integrity_20240513

…Sanaei, Pegues, Torries, Phan, Shamsaei, Fatigue Fract Eng Mater Struct. 42 (2019) 13000 Romano, Nezhadfar, Shamsaei, Seifi, Beretta, Theoretical and Applied Fracture Mechanics 106 (2020) 102477 4 Background L-PBF Inconel 718 AB: As-built SB: Sand-blasting DF: Drag Finishing T: Turned G: Grinding GDF: Grinding+Drag Finishing  Different…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/FAA_JAMS_Surface-Integrity_20240513.pdf

PDF

18-Parmigiani-Evaluation-of-Parameters

… that the delaminations were caused by high moisture content, low applied pressure, and a low debulking time. Solution • Adjusted processing parameters resulted in minimal delaminations. • 10 Today’s New Content: Specimen Manufacturing Additional Manufacturing problem: • Additional manufacturing problem occurred with the Machined Step Plate (with…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations/18-Parmigiani-Evaluation-of-Parameters.pdf

PDF

Renegade-8HS-Quartz-fabric-CAM-RP-2024-007-Rev-A-10.8.25-MPDR

…properties, environments, laminate architecture, and loading situations may require additional testing. The use of NCAMP material and process specifications does not guarantee material or structural performance. Material users should be actively involved in evaluating material performance and quality including, but not limited to, performing regular…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/Renegade-8HS-Quartz-fabric-CAM-RP-2024-007-Rev-A-10.8.25-MPDR.pdf

PDF

800_Thursday_Raju

…and hoop loading Tangential strains under hoop loading was significantly higher than longitudinal & combined loading cases 1600 Load ( lbf/in) 1400 1200 1000 Failure initiated under hoop loading 800 Bulging at hole edge adds to tangential component 600 LONGITUDINAL LOADING 400 COMBINED LOADING(long) COMBINED LOADING(hoop) 200 HOOP…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/800_Thursday_Raju.pdf

PDF

OneStop_Strategic_Plan_Report

…Review IVR call flow to identify areas of improvement, both for immediate change and for Student Accounts “Go Live” Spring 2016 Explore Engineering advising needs for IVR Completed Work with Blackboard to implement changes in IVR scripting Spring 2016 Update IVR call flow to include Student Accounts Spring 2016 Strategy # 4: Provide plan for better …

https://www.wichita.edu/services/onestop/_documents/OneStop_Strategic_Plan_Report.pdf

PDF

Spirit-CAM-RP-2019-057_Hexcel-8552S-8HS-Fabric_Rev-7-16-25

…the needs of any specific company's program; specific properties, environments, laminate architecture, and loading situations may require additional testing. The use of NCAMP material and process specifications does not guarantee material or structural performance. Material users should be actively involved in evaluating material performance and quality…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/Spirit-CAM-RP-2019-057_Hexcel-8552S-8HS-Fabric_Rev-7-16-25.pdf

PDF

FactorsAffectingQualificationCertificationSurfaceIntegrityofAdditivelyManufacturedTi6Al4VPartsshao

…Sanaei, Pegues, Torries, Phan, Shamsaei, Fatigue Fract Eng Mater Struct. 42 (2019) 13000 Romano, Nezhadfar, Shamsaei, Seifi, Beretta, Theoretical and Applied Fracture Mechanics 106 (2020) 102477 4 Background L-PBF Inconel 718 AB: As-built SB: Sand-blasting DF: Drag Finishing T: Turned G: Grinding GDF: Grinding+Drag Finishing  Different…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/FactorsAffectingQualificationCertificationSurfaceIntegrityofAdditivelyManufacturedTi6Al4VPartsshao.pdf

Word doc

ANNUAL_SECURITY_REPORT_2018

…a virtual reality studio, film studios, a motion capture studio, computer labs, design studios and general classrooms associated with the Bachelor of Applied arts in Media Arts (BAA) degree. Wichita State University WestWichita State University West is located at 3801 N. Walker Ave., Maize, KS (“WSU West”). This 24,000 square-foot facility provides…

https://www.wichita.edu/about/clery/_documents/ANNUAL_SECURITY_REPORT_2018.docx

PDF

NPS-83961-Rev-A-Sept-9-2020-3960-Process-Spec

…of mechanical test panels. a. Place a solid FEP film on the mold. Liquid release agent may be applied on the mold in lieu of the solid FEP film. b. Place a straight edge ruler/dam on the mold/layup surface and secure it with tape. Begin laying up in accordance with the proper stacking sequences (see Appendix 2 of test plan or appropriate…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/NPS-83961-Rev-A-Sept-9-2020-3960-Process-Spec.pdf

PDF

15-Andrulonis-Advanced-Fiber-Reinforced-Polymer

…manufacturing into production using advanced technologies. Advances in vehicle development will likely accelerate during the next decade as new emerging technologies are applied to design and placed into production throughout the aircraft industry. Research needed to prove the safety and integrity of these aircraft and advanced materials for the general…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations/15-Andrulonis-Advanced-Fiber-Reinforced-Polymer.pdf

PDF

Revised_IRB_Application_Feb2019-RE

…eligible for expedited review, including studies of cleared medical devices for new indications.) Examples: (a) physical sensors that are applied either to the surface of the body or at a distance and do not involve input of significant amounts of energy into the subject or an invasion of the subject’s privacy; (b) weighing or testing sensory acuity; (c)…

https://www.wichita.edu/research/IRB/_documents/Revised_IRB_Application_Feb2019-RE.pdf

PDF

8-UCSD-JAM8SPresentation-2017-ImpactNDE-v4

…Composite Aircraft Structures / Non-Destructive Evaluation Methods for Detecting Major Damage in Internal Composite Structural Components Hyonny Kim, Professor, Dept. Structural Engineering University of California San Diego 2017 JAMS Technical Review March 21, 2017 University of Utah, Salt Lake City, UT Impact Damage Formation on Composite Aircraft…

https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations/8-UCSD-JAM8SPresentation-2017-ImpactNDE-v4.pdf