356 results · showing 281–300 · partial match · 140 ms

Search Results

  1. PDF

    FAA_JAMS_Surface-Integrity_20240513

    … NCAME Project Team Auburn University Jim Dobbs Boeing Jeffrey Gaddes US Army Richard Grylls Beehive3D Frederic Marrion GE Additive Mahdi Habibnejad GE Additive Mohsen Seifi ASTM Int. Brandon Phillips US Army Katherine Olson US Army Ankit Saharan EOS – N.A. Douglas Wells MSFC, NASA 8 Senior Investigators 8 Graduate Research Assistants PI: Nima…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/FAA_JAMS_Surface-Integrity_20240513.pdf

  2. PDF

    CrashworthinessofComposites-Raju

    …8 Scaling Issues.. • Specimen size – Reduced specimen size to maximize strain rates – Reduced specimens size to minimize failure loads to within testing machine capability ASTM standards Specimen size used for high rate tests Will the same strengths be observed irrespective of specimen size ? Geometric Scaling.. λa a λb b h λh …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/CrashworthinessofComposites-Raju.pdf

  3. PDF

    18-Parmigiani-Evaluation-of-Parameters

    …Multiple methods were explored as there was little literature on the compression energy release rate. Further research in energy release rate methods used for tension showed ASTM E399, Area method, Compliance Calibration (CC), Modified Compliance Calibration Method (MCC), and J- Integral were used. • Due to the nature of compression damage and…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations/18-Parmigiani-Evaluation-of-Parameters.pdf

  4. PDF

    Syensqo_EP2400_and_Teijin_NCF-NCP-RP-2024-009_Rev-10.21.25

    …Fabrics - DRNF IM BA NMS 241/1, NMS 241F/1 and NMS 241R/1 NPS 82401 PRISM® EP2400 Syensqo PRISM® EP2400 with Tenax™ DRNF - Biaxial Lamina Properties Summary Tg METHOD: ASTM D7028 Tg(wet): 275°F of fiber manufacture of resin manufacture of composite manufacture of testing of analysis Apr-Oct 2021 2022 and 2023 Mar to Dec 2023 July 2023 to July …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/Syensqo_EP2400_and_Teijin_NCF-NCP-RP-2024-009_Rev-10.21.25.pdf

  5. PDF

    130-Utah-JAMS-Adhesive-Durability-032117

    …10 Composite Wedge Test Development: Comparisons With DCB Test • Comparison of Gc values – Wedge test: Gc calculated based on crack length – DCB: Gc calculated following ASTM D5528 • IM7/8552 carbon/epoxy unidirectional laminates • Two test environments – Room temperature/ambient – 122°F (50°C) and 95% humidity Composite Wedge Test • Two “bond” …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations/130-Utah-JAMS-Adhesive-Durability-032117.pdf

  6. PDF

    FYSsuccess

    …0.0075 0.0183 0.4118 Term code_Fall 2011 -0.5930 0.0294 -20.1662 0.0001** Term code_Fall 2012 -0.4568 0.0409 -11.1679 0.0001** Term code_Fall 2013 -0.5434 0.0400 -13.6015 0.0001** Term code_Fall 2014 -0.5215 0.0395 -13.1974 0.0001** Sex male Pell recipient Y *p < .05. **p < .01. 84 0.6805 Journal of The First-Year…

    https://www.wichita.edu/services/studentsuccess/first_year_seminar/FYSsuccess.pdf

  7. PDF

    FactorsAffectingQualificationCertificationSurfaceIntegrityofAdditivelyManufacturedTi6Al4VPartsshao

    …John Bakuckas Walter Sippel Jim Dobbs Boeing Jeffrey Gaddes US Army Richard Grylls Beehive3D Frederic Marrion GE Additive Mahdi Habibnejad GE Additive Mohsen Seifi ASTM Int. Brandon Phillips US Army Katherine Olson US Army Ankit Saharan EOS – N.A. Douglas Wells MSFC, NASA NCAME Project Team Auburn University 7 Senior Investigators 8…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/FactorsAffectingQualificationCertificationSurfaceIntegrityofAdditivelyManufacturedTi6Al4VPartsshao.pdf

  8. PDF

    TorayTC1225UnitapeNCP-RP-2019-011RevA5.14.2021SARFinal

    …Lot #2 F5118F1 6/1/2018 WO019197VIML 2/17/2017 080918-1TP1 8/9/2018 8/28/2018 - 3/28/2019 Lot #3 A1018F1 6/1/2018 V010849 7/17/2017 090618-1TP4 9/6/2018 Tg METHOD: DMA (ASTM D7028) & DSC (ASTM D3418) 4/2/2019 - 10/08/2019 10/15/2019 8/1/2019 - 11/18/2019 Date of testing Date of data submittal Date of analysis LAMINA MECHANICAL PROPERTY B-BASIS …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/TorayTC1225UnitapeNCP-RP-2019-011RevA5.14.2021SARFinal.pdf

  9. PDF

    0800-Intro-Kickoff

    …1010 BREAK 1030 NIAR Update 1100 LUNCH 1230 Discussion: PAQCS 1015 Office of the Secretary of Defense (OSD) POV on AM 1035 BREAK 1055 Design Approval Holder Updates 1135 LUNCH 1305 Working Group Breakout Session Instructions The Rhatigan Student Center Beggs Ballroom 1300 3 Quick Hits 1330 WG Breakout Session Instructions 1310 WG Breakout Sessions:…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/0800-Intro-Kickoff.pdf

  10. PDF

    JAMS2019_Engineering-Approach_Combined-Loading

    …of Face/Core Interface Debonding in Aircraft Sandwich Composites Subjected to Combined Pressure and In-plane Loading: An Engineering Approach (On Going) Other Contributions to ASTM D30 & CMH-17 • • CMH-17 Rev. H chapters/sections (completed review) SCB Fracture test standard development ASTM D30 Other Publications • • Damage Initiation and Fracture …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations/JAMS2019_Engineering-Approach_Combined-Loading.pdf

  11. PDF

    W0920_UD_HughesHeider

    … contact angle experiments. The values generated from these experiments compared to the experimental capillary pressure determined from the autoclave. 90 60 50 40 30 20 10 0 W1 WA The Joint Advanced Materials and Structures Center of Excellence WB 10 Membrane Limitations • Draping Limitations continue to be one of the major problems of the …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/W0920_UD_HughesHeider.pdf

  12. PDF

    0900-EASA-Update

    …However, the experts also generally agree that there is a need for this technology to mature so that it can be used as one of the tools supporting this task. See WG3. *e.g. ASTM Strategic Guide: Additive Manufacturing In-Situ Monitoring Technology Readiness (2023) 5 EASA - FAA Industry-Regulator AM Event 2023(F2F) Outline: Working Groups 2023…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/0900-EASA-Update.pdf

  13. PDF

    CrashworthinessofComposites-CertificationbyAnalysis-Olivares-Acosta

    …LIMITATIONS TEST VARIABILITY STRAIN RATE EFFECTS MODEL PARAMETERS FAILURE MODES MATERIAL MODELS LIMITATIONS STRAIN RATES LOADING RATES VARIOUS STRUCTURAL COMPONENTS DEFINE ASTM STANDARD NO STRAIN RATE & LOADING RATE VARIABILITY STUDY OBTAIN MECHANICAL PROPERTIES DEFINE NUMERICAL MATERIAL MODELS FOR COMPOSITES/ METALLIC COMPONENTS VALIDATE …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/CrashworthinessofComposites-CertificationbyAnalysis-Olivares-Acosta.pdf

  14. PDF

    MTM45-1-AS4-145-CPT-Normal-Data-M-Cure-Cycle-Values-Only-2-1-08

    … ASU1 Test LT Cure Cycle Condition M CTD Test Group: AITR1392-ASU1-LT-M-CTD Material: MTM45-1/AS4-145-32%RW Normalization: Test Type: Test Method: Longitudinal Tensile MP1112 (ASTMD3039) Specimen ID AITR1392-ASU1-LT-C-M1-CTD-1 AITR1392-ASU1-LT-C-M1-CTD-2 AITR1392-ASU1-LT-C-M1-CTD-3 AITR1392-ASU1-LT-C-M1-CTD-4 AITR1392-ASU1-LT-C-M1-CTD-5…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-mtm45-1/MTM45-1-AS4-145-CPT-Normal-Data-M-Cure-Cycle-Values-Only-2-1-08.pdf

  15. PDF

    EP2190-T650-3KPW-Fabric-NCP-RP-2022-003-Rev-09-03-2025-SAR

    …Phase 3 3/30/2021 12/6/2021 4/8/2021 12/23/2021 Phase 1 10/1/2019 - 6/19/2020 10/18/2019 - 8/15/2020 December 2021 March 2022 Phase 1 11/14/2018 10/18/2018 1/16/2019 Tg METHOD: ASTM D7028 Lot 2 Phase 2 Phase 3 Phase 1 4/24/2017 10/30/2018 1/17/2019 Lot 3 Phase 2 1/21/2021 9/8/2021 9/27/2021 9/23/2022 1/31/2022 10/4/2021 10/4/2021 10/26/2021 Phase 2…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/EP2190-T650-3KPW-Fabric-NCP-RP-2022-003-Rev-09-03-2025-SAR.pdf

  16. PDF

    5915-01-Exp-08-31-2026

    …Testing Temperature Variation RTCA/DO-160 D1, E1, F1, G, Section 5 Humidity RTCA/DO-160 D1, E1, F1, G, Section 6 Salt Fog RTCA/DO-160 C1, D1, E1, F1, G, Section 14; ASTM B117; MIL-STD-810 G1, H Method 509.6 On the following products and materials: Aircraft system and component level testing on equipment such as actuators, FADECs, cockpit…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/5915-01-Exp-08-31-2026.pdf

  17. PDF

    NPS_81253AFP_Rev-9.23.25

    …NCAMP specifications, the definitions in DOT/FAA/AR-06/10 and DOT/FAA/AR-07/3 shall apply. For definitions not provided in DOT/FAA/AR-06/10 and DOT/FAA/AR-07/3, the definitions in ASTM D3878 shall apply. For definitions not provided in ASTM D3878, the definitions in CMH-17 (formerly MIL-HDBK-17) shall apply. 3.1.1 Automated Fiber Placement Machine: Any…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NPS_81253AFP_Rev-9.23.25.pdf

  18. PDF

    CGRSAbstractBooklet_2010

    … flaking of concrete surface resulting in lower skid resistance and service life. In this study, concrete mixes with six types of fly ashes were tested in the laboratory using the ASTM 672 Standard. Curing compound, a waxy coating sprayed on the fresh concrete surface to reduce evaporation, was used to compare the effects of curing on salt scaling of…

    https://www.wichita.edu/academics/graduate_school/cgrs/_documents/CGRSAbstractBooklet_2010.pdf

  19. PDF

    240919-WG3-DAY-3-FINAL-SLIDES

    … EASA/FAA AM EVENT – WG3 WG3 BREAKOUT SESSION DAY 3 3. To define next steps in 5-year plan 2024 Standardization ARP 7065 ARP 7068 2025 ARP feedback 2026 2027 2028 AMS 70XX ASTM XXXXX Lessons learned Industry collab. Projects SONRISA Project (Germany) Commercial SW/HW ISPM Hardware Maturation ‘Public’ Report ISPM DEMO (FAA/EASA support) DARPA…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/240919-WG3-DAY-3-FINAL-SLIDES.pdf

  20. PDF

    Fall-2024-Joint-Proceedings

    …that are significantly different from those used for PMC materials. o Paulo Mendes asked about the use of equivalency methods when there has been a change in test method (e.g. ASTM D695 vs. ASMT D3410 vs. ASTM D6641) or different specimen thickness, test speeds, etc. Michelle Man and Dan Ruffner urged caution and noted that there are significant test…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Fall-2024-Joint-Proceedings.pdf