120 results · showing 101–120 · partial match · 122 ms

Search Results

  1. PDF

    W0920_UD_HughesHeider

    …The Joint Advanced Materials and Structures Center of Excellence 6 Improve Understanding of Membrane Behavior •Desirable Characteristics for a membrane used in VARTM: – Gas permeable material • OR High air permeability through the thickness – Resin-proof material • OR Low liquid/resin permeability through the thickness •Compatibility with resin –…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/W0920_UD_HughesHeider.pdf

  2. PDF

    MTM45-1-AS4-145-CPT-Normal-Data-LH-Cure-Cycle-Values-Only-2-1-08

    …Notes: NT=Not Tested NR=No Result NA=Not Applicable FM=Failure Mode Unacceptable 11.4980 11.5020 11.5002 0.0018 0.02 10 1.5078 1.5095 1.5086 0.0005 0.04 10 0.1291 0.1321 0.1305 0.0010 0.75 10 0.0054 0.0055 0.0054 0.0000 0.75 10 Specimen ID Condition CTD Cured Ply Thickness: #Plies: 24 0.0055 ACG, Inc. Material & Process Laboratory Report 0.2512…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-mtm45-1/MTM45-1-AS4-145-CPT-Normal-Data-LH-Cure-Cycle-Values-Only-2-1-08.pdf

  3. PDF

    FYSsuccess

    …0.0075 0.0183 0.4118 Term code_Fall 2011 -0.5930 0.0294 -20.1662 0.0001** Term code_Fall 2012 -0.4568 0.0409 -11.1679 0.0001** Term code_Fall 2013 -0.5434 0.0400 -13.6015 0.0001** Term code_Fall 2014 -0.5215 0.0395 -13.1974 0.0001** Sex male Pell recipient Y *p < .05. **p < .01. 84 0.6805 Journal of The First-Year…

    https://www.wichita.edu/services/studentsuccess/first_year_seminar/FYSsuccess.pdf

  4. PDF

    CV-Hwang

    …OR, USA, 11/15/2020. [2] M.K. Egbo, Y. Nasersharifi, and G. Hwang, “(Poster Presentation) Thermal Performance of Capillary-Controlled Thin SinteredParticle Wick (IMECE2019-13057)”, ASME International Mechanical Engineering Congress and Exposition (IMECE), Salt Lake City, Utah, USA, 11/13/2019. [3] E. Norouzi, C. Park, and G. Hwang, “Nano Heat Pipe…

    https://www.wichita.edu/profiles/_cvs/CV-Hwang.pdf

  5. PDF

    0800-Intro-Kickoff

    …1010 BREAK 1030 NIAR Update 1100 LUNCH 1230 Discussion: PAQCS 1015 Office of the Secretary of Defense (OSD) POV on AM 1035 BREAK 1055 Design Approval Holder Updates 1135 LUNCH 1305 Working Group Breakout Session Instructions The Rhatigan Student Center Beggs Ballroom 1300 3 Quick Hits 1330 WG Breakout Session Instructions 1310 WG Breakout Sessions:…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/0800-Intro-Kickoff.pdf

  6. PDF

    AD-02-CONSTRUCTION-MAINTENANCE-AND-REPAIR

    …punch list Work, other conditions precedent to Substantial Completion include, but are not limited to: (a) completion of the exterior elements (site cleanup and removal, paving parking); interior spaces; mechanical, electrical and plumbing systems; common areas; and fire and life safety systems; (b) Project must be move-in clean; and (c)…

    https://www.wichita.edu/administration/generalcounsel/_documents/AD-02-CONSTRUCTION-MAINTENANCE-AND-REPAIR.pdf

  7. PDF

    115_Tuesday_Heider_Hughes

    …(mm) The Joint Advanced Materials and Structures Center of Excellence 650 9 MAIN REQUIREMENTS OF THE MEMBRANE •Desirable Characteristics for a membrane used in VARTM: – Gas permeable material • OR High air permeability through the thickness – Resin-proof material • OR Low liquid/resin permeability through the thickness •Compatibility with resin –…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/115_Tuesday_Heider_Hughes.pdf

  8. PDF

    TorayTC1225UnitapeCAM-RP-2019-036RevA5.10.2021MPDRFinal

    …17.78 18.77 6 0.3744 0.04506 12.04 0.3160 0.4230 6 Average Standard Dev. Coeff. of Var. [%] Min. Max. Number of Spec. Avg. Specimen Thickness [in] 0.04173 0.04083 0.04058 0.04000 0.03940 0.04042 Page 105 of 443 # Plies in Laminate Failure Mode Avg. tply [in] Strengthnorm [ksi] Modulusnorm [Msi] 8 8 8 8 8 8 XGM LGB, SGM XGM XGM XGM XGM …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/TorayTC1225UnitapeCAM-RP-2019-036RevA5.10.2021MPDRFinal.pdf

  9. PDF

    CV-Hwang

    …Conference, 11/15/2020. [10] M.K. Egbo, Y. Nasersharifi, and G. Hwang, “(Poster Presentation) Thermal Performance of Capillary-Controlled Thin SinteredParticle Wick (IMECE2019-13057)”, ASME International Mechanical Engineering Congress and Exposition (IMECE), Salt Lake City, Utah, USA, 11/13/2019. [11] E. Norouzi, C. Park, and G. Hwang, “Nano Heat Pipe…

    https://www.wichita.edu/academics/engineering/mechanical_engineering/_documents/CV-Hwang.pdf

  10. PDF

    Toray-TC380-T800HB-6K-2x2-Twill-CAM-RP-2025-023-Rev-9-29-2025-MPDR

    …77.71 87.94 84.05 79.03 82.04 7.241 7.085 6.545 7.281 7.150 6.938 6.996 6.428 6.402 6.919 6.888 6.795 7.419 6.963 6.963 7.229 7.119 6.864 0.1273 0.1296 0.1324 0.1252 0.1281 0.1305 0.1305 0.1335 0.1365 0.1276 0.1313 0.1345 0.1304 0.1324 0.1345 0.1330 0.1351 0.1364 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 BGM BGM BGM HAB BGM BAB BGM BGM BGM…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Toray-TC380-T800HB-6K-2x2-Twill-CAM-RP-2025-023-Rev-9-29-2025-MPDR.pdf

  11. PDF

    MTM45-1-IM7-145-LH-Cure-Cycle-Values-2-6-08

    … (%) No. Specimens Notes: NT=Not Tested NR=No Result NA=Not Applicable FM=Failure Mode Unacceptable 12.0001 12.0025 12.0011 0.0008 0.01 10 1.4999 1.5034 1.5019 0.0012 0.08 10 0.1305 0.1334 0.1320 0.0011 0.86 10 0.0054 0.0056 0.0055 0.0000 0.86 10 Specimen ID Condition RTD Cured Ply Thickness: #Plies: 24 ACG, Inc. Material & Process Laboratory Report …

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-mtm45-1/MTM45-1-IM7-145-LH-Cure-Cycle-Values-2-6-08.pdf

  12. PDF

    Urcaf_Program_2024_final

    …issues. A 3D printed prototype, created with a Bambu Labs X1 Carbon 3D printer, highlighted accuracy within the design and collected data. Areas of improvement were identified, paving the way for future enhancements. Conclusion: Our research study improved sustainability in receipt printers, providing an efficient solution. The prototype created…

    https://www.wichita.edu/academics/research/urcaf/documents/Urcaf_Program_2024_final.pdf

  13. PDF

    CAM-RP-2018-013-NC-Stratasys-Certified-ULTEM-9085-MPDR-Rev-A-12-02-20

    …temperature conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: NASM 21297-04004 bolts with MS 21084 nuts and MS 21206 washers for FHT, and FHC. NASM 21297-04016 bolts with MS 21084 nuts and MS 21206 washers for SSB. Open and Filled-Hole Tension specimens…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/CAM-RP-2018-013-NC-Stratasys-Certified-ULTEM-9085-MPDR-Rev-A-12-02-20.pdf

  14. PDF

    MTM45-1-AS4-145-CPT-Normal-Data-M-Cure-Cycle-Values-Only-2-1-08

    …13693.00 LAT 154.872 154.286 10.070 1.0053 0.0862 0.0054 13345.00 XGM 154.063 150.853 10.069 1.0054 0.0870 0.0054 14081.00 DGM/LWB 160.925 159.157 10.068 1.0014 0.0859 0.0054 13054.00 XGM/LAB 151.696 148.134 10.065 0.9969 0.0872 0.0055 NT NT NT 10.0647 10.0713 10.0678 0.0021 0.02 10 0.9969 1.0085 1.0055 0.0037 0.37 10 0.0859 0.0887 0.0876 0.0010 1.15…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-mtm45-1/MTM45-1-AS4-145-CPT-Normal-Data-M-Cure-Cycle-Values-Only-2-1-08.pdf

  15. PDF

    Wichita-HSEC-Program-2022-08-22-final

    …936 156 1,330 130 3,033 Shared with Clinic or Department Shared with Clinic or Department 5 stations currently, 10 future Observation and Research adjacent to booths 1 4 384 1305 384 shared 384 1 4 400 1300 400 shared 400 1.25 1.25 500 500 Sub Total Classrooms Audiology Classroom General Classrooms Proposed Room Qty Sub Total CSD Total NSF…

    https://www.wichita.edu/academics/wichita_biomedical_campus/_images/Wichita-HSEC-Program-2022-08-22-final.pdf

  16. PDF

    FINAL_TECHNICAL_REPORT_Task3_3_1_10

    …8/7/2009 XI. Summary of LCI Information Inputs Input Flow Input purity Input UID Input Name Units Comments UIDCO2FromAir CO2 from air 116 [kg/hr] Used for desilication 1305-78-8 calcium monoxide 143 [kg/hr] 1310-73-2 Sodium hydroxide 83.6 [kg/hr] UIDBauxiteAtUSPort bauxite, at US port 2246 [kg/hr] Total 2590 [kg/hr] Added to…

    https://www.wichita.edu/academics/engineering/windenergy/documents/FINAL_TECHNICAL_REPORT_Task3_3_1_10.pdf

  17. PDF

    EP2190-T650-3KPW-Fabric-NCP-RP-2022-003-Rev-09-03-2025-SAR

    …Tension 1 (UNT1) Modulus Statistics Environment CTA RTA ETA2 ETA3 ETW1 ETW2 Mean 7.031 6.825 6.824 6.711 6.669 6.215 Stdev 0.07321 0.1127 0.1327 0.1251 0.08212 0.3873 CV 1.041 1.651 1.945 1.864 1.231 6.232 Min 6.887 6.609 6.602 6.575 6.519 5.435 Max 7.104 7.020 6.976 6.944 6.884 6.605 No. Batches 2 4 1 1 …

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/EP2190-T650-3KPW-Fabric-NCP-RP-2022-003-Rev-09-03-2025-SAR.pdf

  18. PDF

    Renegade-8HS-Quartz-fabric-CAM-RP-2024-007-Rev-A-10.8.25-MPDR

    … 101.9 101.3 101.6 97.03 104.5 105.1 103.2 102.8 86.45 2.191 2.535 80.77 90.16 18 102.1 1.963 1.922 97.03 105.1 18 Page 236 of 308 Avg. Specimen Thickness [in] 0.1310 0.1309 0.1305 0.1369 0.1376 0.1361 0.1373 0.1372 0.1381 0.1377 0.1378 0.1374 0.1379 0.1382 0.1375 0.1366 0.1377 0.1380 # Plies in Laminate Failure Mode Avg. tply [in] 2% Offset…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Renegade-8HS-Quartz-fabric-CAM-RP-2024-007-Rev-A-10.8.25-MPDR.pdf

  19. PDF

    Spirit-CAM-RP-2019-057_Hexcel-8552S-8HS-Fabric_Rev-7-16-25

    …conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: 1) NASM 21297-04004 bolts with NASM 21084 nuts and MS21206 washers for FHT and FHC 2) NASM 21297-04016 bolts with MS 21084 nuts and MS21206 washers for SSB For bearing tests, procedures and…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/Spirit-CAM-RP-2019-057_Hexcel-8552S-8HS-Fabric_Rev-7-16-25.pdf

  20. PDF

    CAM-RP-2023-007-NC-Additively-Manufactured-Hexpekk-100

    …temperature conditions specified in this document. For filled-hole and bearing tests, the hole diameter was 0.25 in -0.000 +0.003 in. The following fasteners were used: NASM 21297-04004 bolts with MS 21084 nuts and MS 21206 washers for FHT, and FHC. NASM 21297-04017 bolts with MS 21084 nuts and MS 21206 washers for SSB. Open and Filled-Hole Tension specimens…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/CAM-RP-2023-007-NC-Additively-Manufactured-Hexpekk-100.pdf