346 results · showing 321–340 · partial match · 155 ms

Search Results

  1. PDF

    Hexcel-8552S-AS4-3k-8HS_Stat-Analysis-Report-NCP-RP-2019-013_Rev-6-12-2025

    Report No: NCP-RP-2019-013 Rev Report Date: June 12th, 2025 Hexcel Hexply® 8552S AS4 GP 3K 8HS fabric with 38% RC Material Allowables Statistical Analysis Report NCAMP Project Number: NPN 021801 NCAMP Report Number: NCP-RP-2019-013 Rev Report Date: June 12th, 2025 Elizabeth Clarkson, Ph.D. National Center for Advanced Materials Performance (NCAMP) National…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/Hexcel-8552S-AS4-3k-8HS_Stat-Analysis-Report-NCP-RP-2019-013_Rev-6-12-2025.pdf

  2. PDF

    NCP-RP-2019-004-FINAL-Stat-Analysis-Report-03-08-2023-1

    Report No: NCP-RP-2019-004 Rev NC Report Date: March 8th, 2023 Tenax®-E TPWF PEEK-HTA40 E13 3K 5HS Material Allowables Statistical Analysis Report NCAMP Project Number: NPN 071507 Report Number: NCP-RP-2019-004 Rev N/C Report Date: March 8th, 2023 Jorge Chavez-Salas, M.Sc. National Center for Advanced Materials Performance (NCAMP) National Institute for…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCP-RP-2019-004-FINAL-Stat-Analysis-Report-03-08-2023-1.pdf

  3. PDF

    Safety-and-Certification-of-Discontinuous-Salviato

    Certification of Discontinuous Composite Material Forms for Aircraft Structures Federal Aviation Administration Presented by: Marco Salviato University of Washington, Department of Aeronautics & Astronautics JAMS Technical Review September 29th, 2021 Joint Centers of Excellence for Advanced Materials Research Team U. of Washington: PIs: Marco…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations-2021/Safety-and-Certification-of-Discontinuous-Salviato.pdf

  4. PDF

    840_Tuesday_Ilcewicz

    …(Chicago ACO) David Ostrodka ACE-118W (Wichita ACO) Richard Noll ANE-150 (Boston ACO) John Harding ANM-108B (Seattle CMO) David Swartz ACE-115N (Anchorage ACO) Larry Ilcewicz ANM-115N (CS&TA, Composites) FAA/Industry JAMS Meeting (Atlantic City, NJ July10-12, 2007) Those attending the JAMS Meeting are highlighted in blue italics. CSTA and STS…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/840_Tuesday_Ilcewicz.pdf

  5. PDF

    200-JAMS-2017-WSU-LVS

    Durability of bonded aerospace structure JAMS Spring conference March 21st 2017 PI: Dr. Lloyd V Smith Washington State University Pullman, WA Graduate students: Preetam C Mohapatra Reza Moheimani David Lemme Durability of Bonded Aircraft Structure • Motivation and Key Issues: • • Adhesive bonding is a key path towards reduced weight in aerospace…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations/200-JAMS-2017-WSU-LVS.pdf

  6. PDF

    T0920_WSU_Burford

    …29, 2008)  M. Niedzinski announced the FS spec/standards initiative and introduced D. Burford  D. Burford provided overview (verbal)  D. Burford was elected to committee  Approval was granted to add formal presentation of proposal to agenda in next AMEC meeting The Joint Advanced Materials and Structures Center of Excellence SAE Material…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/T0920_WSU_Burford.pdf

  7. PDF

    IM7G-Unitape-3

    Report No: NCP-RP-2014-006 Rev N/C Report Date: August 23, 2017 Solvay Cytec Cycom EP 2202 IM7G Unitape Gr 190 RC 33%Material Allowables Statistical Analysis Report NCAMP Project Number: NPN 061101 Report #: NCP-RP-2014-006 Rev N/C Report Release Date: August 23, 2017 Elizabeth Clarkson, Ph.D. National Center for Advanced Materials Performance (NCAMP)…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-ep2202/IM7G-Unitape-3.pdf

  8. PDF

    T650-3k-70-PW-3

    Report No: NCP-RP-2014-011 Rev N/C Report Date: August 23, 2017 Solvay Cytec Cycom EP 2202 T650 3KPW Fabric 38% RC Material Allowables Statistical Analysis Report Report Release Date: August 23, 2017 Report # NCP-RP-2014-011 N/C Elizabeth Clarkson, Ph.D. National Center for Advanced Materials Performance (NCAMP) National Institute for Aviation Research…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-ep2202/T650-3k-70-PW-3.pdf

  9. PDF

    Olivares_JAMS_2017

    … Ph.D., NIAR-WSU JAMS 2017 Technical Review March 21, 2017 Crashworthiness - Certification by Analysis • Motivation and Key Issues – The introduction of composite airframes warrants an assessment to evaluate that their crashworthiness dynamic structural response provides an equivalent or improved level of safety compared to conventional metallic…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/Olivares_JAMS_2017.pdf

  10. PDF

    Wichita-HSEC-Program-2022-08-22-final

    … the role and importance of different health care professions. health sciences education complex_2022 08 22 6 clark | huesemann + Kahler Slater Process This program was built by initially having the planning team tour all existing spaces that were considered candidates for inclusion on the HSEC campus; looking at how they currently function, and…

    https://www.wichita.edu/academics/wichita_biomedical_campus/_images/Wichita-HSEC-Program-2022-08-22-final.pdf

  11. PDF

    Adhesive-Bond-Qualification-Guidance-Seneviratne

    …for Advanced Materials Adhesive Bond Qualification Guidance for Aircraft Design and Certification • Principal Investigators & Researchers • John Tomblin, PhD, and Waruna Seneviratne, PhD • Upul Palliyaguru, and Anushi Amaranayake • FAA Technical Monitor • Ahmet Oztekin, PhD • Other FAA/CMH-17 Personnel Involved • Larry Ilcewicz, PhD, Cindy…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations-2021/Adhesive-Bond-Qualification-Guidance-Seneviratne.pdf

  12. PDF

    T1400_WSU_Salah_Teardown

    …analysis showed that the degree of cure of the spars is close to 100%, that additional curing may have occurred in the upper skin due to UV exposure (overall at least 95% cure was achieved in the structure)  Significant improvements in composite manufacturing processes and NDI methods  New material resin system thermal properties comparable to old…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/T1400_WSU_Salah_Teardown.pdf

  13. PDF

    1115-JAMS_2017_Olivares_final_March2017_Rev1

    … Ph.D., NIAR-WSU JAMS 2017 Technical Review March 21, 2017 Crashworthiness - Certification by Analysis • Motivation and Key Issues – The introduction of composite airframes warrants an assessment to evaluate that their crashworthiness dynamic structural response provides an equivalent or improved level of safety compared to conventional metallic…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations/1115-JAMS_2017_Olivares_final_March2017_Rev1.pdf

  14. PDF

    FINAL_TECHNICAL_REPORT_Task3_3_1_10

    Final Technical Report Project Title: Sustainable Energy Solutions Task 3.0:Life-Cycle Database for Wind Energy Systems Award Number: Recipient: DE-FG36-08GO88149 Wichita State University Project Location(s): Wichita State University Wichita, Kansas 67260 Project Period: June 1, 2008 – December 31, 2009 Date of Report: March 1, 2010 Written by: Michael…

    https://www.wichita.edu/academics/engineering/windenergy/documents/FINAL_TECHNICAL_REPORT_Task3_3_1_10.pdf

  15. PDF

    115_Tuesday_Heider_Hughes

    …• Industry Participation – Gore (Munich, Germany) • Provided membrane materials, access to instrumentation and technical input – Donaldson Membranes (Warminster, PA) • Provided membrane materials – Hexcel (Seguin, Texas) • Provided resin and fabric material and technical input – Cytec (Anaheim, CA) • Provided resin and fabric material and technical…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/115_Tuesday_Heider_Hughes.pdf

  16. PDF

    NPS-80530R-Repair-Process-Specification-12-22-2020

    … by: John Tomblin, Rachael Andrulonis, Jeff Gilchrist, Royal Lovingfoss Reviewed by: Eric Chesmar, Phil Croft, Rusty Keller, Eric Stenne, Marie-Josee Landry, Glyn Richards, Steve Ward, Carl Rousseau, Curtis Davies, Cindy Ashforth, Rusty Jones Distribution Statement A. Approved for public release; distribution is unlimited. National Center for Advanced…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NPS-80530R-Repair-Process-Specification-12-22-2020.pdf

  17. PDF

    100-JAMS-Presentation-Surface-Characterization-2017-Final

    …to reference literature 10 T-Peel Test – ASTM D1876 • Aluminum substrates (primed) • Bond does not extend full length of substrates • After bonding, non-bonded substrate ends bent to a 90º angle • Ideal failure is mode I - cohesive 11 T-Peel Test Results High Strength Average Strength 8 8 6 6 6 4 2 0 0 50 100 150 200 Extension…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/jams-presentations/100-JAMS-Presentation-Surface-Characterization-2017-Final.pdf

  18. PDF

    NPS_82401_Rev-EP2400_VARTM_10.20.25

    …5700 Skylab Road, Huntington Beach, CA 92647 - 234 TFP or equivalent 3.5 Squeegee and Rollers, Ultra High Molecular Weight Polyethylene, ASTM D6712 Type 1, Class 1 and Grade 1 or equivalent. - Open source 3.6 Flashbreaker Tape, Pressure Sensitive Tape qualified for use at 375ºF or above - Keystone Tape, 3911 E. La Palma Ave., Suite V Anaheim, CA 92807…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/NCAMP/NPS_82401_Rev-EP2400_VARTM_10.20.25.pdf

  19. PDF

    2024-Scottsdale-Joint-Statistics-Presentations-Combined

    …• 8.4.5.1.1 • 8.4.5.1.2 • 8.4.5.1.3 • 8.4.5.1.4 • 8.4.5.2 • 8.4.5.3 • 8.4.5.4 Volume 3 • 6.2.2.2 • 6.5 • 6.5.1 Statistical Process Control (SPC) Walter A. Shewhart invented the control chart and the method of statistical control in 1924. SPC is a statistical tool used to identify normal(ie. Common or non-assignable) and abnormal (special cause or…

    https://www.wichita.edu/industry_and_defense/NIAR/Documents/2024-Scottsdale-Joint-Statistics-Presentations-Combined.pdf

  20. PDF

    MTM45-1-CF0525-Data-M-Cure-Cycle-Values-only-1-14-10

    …Test Plan # Material 1392 PWC1 Test WT Cure Cycle Condition M CTD Test Group: AITR1392-PWC1-WT-M-CTD MTM45-1/CF0525-36%RW Normalization: Material: Test Type: Test Method: Warp Tensile MP1112 (ASTMD3039) Specimen ID AITR1392-PWC1-WT-C-M1-CTD-1 AITR1392-PWC1-WT-C-M1-CTD-2 AITR1392-PWC1-WT-C-M1-CTD-3 AITR1392-PWC1-WT-C-M1-CTD-4…

    https://www.wichita.edu/industry_and_defense/NIAR/Research/cytec-mtm45-1/MTM45-1-CF0525-Data-M-Cure-Cycle-Values-only-1-14-10.pdf